751 - 760 of 862
high energy electrical testing equipment
Selling leads
|
...Test Chamber Product Information: The test chamber is designed and manufactured according to the standard requirement of ISO 6941. It is suitable ...
2026-06-11 18:47:25
|
|
...Testing Probe IEC 62196-1 Product information: This equipment meets the requirements of IEC 62196-1:2022 clause 10.1, 10.2, 26.6, etc. It is used ...
2026-06-11 18:51:42
|
|
... of IEC 60811-505, IEC 60811-1-4, VDE 0472 Part 616, and etc. It is applicable for the insulating sheath of the high polymer material, electric ...
2026-06-11 18:50:53
|
|
... Test Probe Product overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.3, figure V.1 (but straight ...
2026-06-11 18:50:02
|
|
...Test Device Equipment overview: The coupler heating test device is designed and manufactured according to IEC60320-1 clause 18.2 and figure 13. It ...
2026-06-11 18:50:11
|
|
...-3-1, VDE0620, BS1363, etc. Application: is used to test the heat resistance of the insulation material. Test sample: Plug and switch power cords, ...
2026-06-11 18:51:55
|
|
...Energy Impact Hammer Product Overview: The Spring Hammer (Impact hammer) is made according to the standards of IEC60068-2-63 and IEC60068-2-75. ...
2026-06-11 18:50:36
|
|
... Test At High Temperature For Heat Resistance Test Product information: Standard: IEC 60884-1 2013 clause 30.1 figure 41. Application: is used to ...
2026-06-11 18:51:21
|
|
...Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure ...
2026-06-11 18:49:55
|
|
... and figure 12. It is used to check the maximum withdrawal force of electric appliances coupler. The minimum withdrawal force is achieved by ...
2026-06-11 18:50:10
|