11 - 20 of 52
hazardous parts protection verify test probe
Selling leads
|
...Test Probe 11 IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings Product Overview: This probe conforms to the standard ...
2026-06-11 18:50:08
|
|
...tem-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is ...
2026-06-11 18:48:48
|
|
...Test Probe B with φ125mm Circular Stop Face Product information: This is a precision test finger made in accordance with many standards like IEC ...
2026-06-11 18:41:27
|
|
...used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for ...
2026-06-11 18:41:58
|
|
... 22, IEC60335-2-9 clause 22, IEC61032 figure 7 device 11, IEC60884-1, IEC60598-1, IEC60335-1 Clause 22.11, etc. It is used to verify the protection ...
2026-06-11 18:53:24
|
|
...Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification Standards & Clauses: IEC61032:1997 “Protection of persons and ...
2026-06-11 18:40:54
|
|
Test Probe A with Built-in Force for IEC61032 IP1X Safety Compliance Product information: It conforms to the standard requirements of IEC61032 fig.1, ...
2026-06-11 18:43:28
|
|
... 2B, IEC 60335-1 clause 8.1.2, etc. This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and ...
2026-06-11 18:50:34
|
|
... clause 5.3.2, 8.5.4.3, V.1.2 and figure V.2, IEC60884-1:2013 clause 10.1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20.1 &21.1, etc. This probe ...
2026-06-11 18:52:44
|
|
...Protection Testing Using Test Probe 14 Product information: Standard:Conforms to IEC 60335-2-82, test probe 14 IEC 61032 etc. Application:It is ...
2026-06-11 18:43:29
|