21 - 30 of 312
flame test chamber
Selling leads
|
Needle Flame Test Apparatus For Testing Insulating Material As Per IEC 60695-11-5 Product information: The Needle Flame Tester consists of a Ф0.9mm ...
2026-09-08 00:29:58
|
|
IEC 60950-1:2013 Annex A.3 Hot Flaming Oil Test Apparatus Product overview: The hot flaming oil test device conforms to IEC60950-1:2005 and IEC60950-1...
2026-09-08 00:29:59
|
|
... after contacting the flame at a certain linear speed. Equipment characteristics: 1. The mask fixture is a metal (aluminum) human head model, which ...
2026-06-11 18:47:18
|
|
...being tested under 11.6kPa (1.68psi). To judge the test result on condition of no explosion, flame, smoke, electric leakage after test. And the ...
2026-06-11 18:44:36
|
|
...according to IEC 60068-2-11-1981, ISO 9227-2006, and etc. This chamber is designed to test the corrosion resistance of the products on the surface ...
2026-09-08 00:29:59
|
|
...test Equipment Fire Risk Assessment Apparatus Overview: This fire hazard test device simulates the thermal stress caused by the heat source or ...
2026-09-08 00:29:57
|
|
...s test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as electronics, electricians, electrical ...
2026-09-08 00:29:58
|
|
...2008 Test B: High temperature test method; 3. GB/T2423.22-2002 Test N: Temperature change test method 4. GJB/150.3-1986 High temperature test 5. ...
2026-06-11 18:46:49
|
|
...according to IEC 60068-2-11-1981, ISO 9227-2006, and etc. This chamber is designed to test the corrosion resistance of the products on the surface ...
2026-09-08 00:29:59
|
|
.... It is required by IEC 60065: 2005 and IEC 60065:2014 Clause 20.2.1, 20.2.5 and Annex G. It simulates the influence of early-stage flame when ...
2026-09-08 00:29:59
|