331 - 340 of 1185
fire hazard testing equipment
Selling leads
|
...Test Probes Protection of Persons and Equipment by Enclosures-Probe for Verification Standards & Clauses: IEC61032:1997 “Protection of persons and ...
2024-12-09 19:10:13
|
|
...tem-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is ...
2024-12-09 21:17:17
|
|
....1, 16.2, IEC 60669-1: 2017 Clause 10.1 &13.3.3 &20.1 &21.1, etc. This probe is intended to verify the basic protection against access to hazardous ...
2024-12-09 21:17:17
|
|
...Test Rod Probe D Test Probe With Alligator Clip Product overview: This rod probe is intended to verify the protection of persons against access to ...
2024-12-09 21:22:19
|
|
...verify the protection against access with a wire. Technical parameters: Model SN2210-4 SN2210-4T (Optional) Name Test rod probe D Test rod probe D ...
2024-12-09 21:22:19
|
|
...Test Finger With Alligator Clip Product overview: This is a precision test finger made in accordance with IEC61032 figure 2 test probe B, it is ...
2025-05-28 22:34:28
|
|
...Test Finger With Alligator Clip Product overview: This is a precision test finger made in accordance with IEC61032 figure 2 test probe B, it is ...
2024-12-09 21:22:19
|
|
...Test Probe A With Nylon Handle Product Overview: This test probe A conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and ...
2024-12-09 19:45:42
|
|
...Test Probe B with φ125mm Circular Stop Face Product information: This is a precision test finger made in accordance with many standards like IEC ...
2024-12-09 20:21:30
|
|
... 2B, IEC 60335-1 clause 8.1.2, etc. This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and ...
2024-12-09 21:07:59
|