51 - 60 of 402
figure 8 test probe
Selling leads
|
... figure 16, etc. This probe is intended to verify the protection against to glowing heating elements. Probe Dimension: Probe cone part length (mm) ...
2026-06-11 18:50:34
|
|
...Test probes for luminous and thermal components 41 Product Overview: This probe meets the requirements of IEC 60335-1 clause 8.1.3, IEC 61032 Test ...
2026-06-11 18:50:59
|
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC ...
2026-06-11 18:53:18
|
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|
|
...clauses 15.102 Figure 102 and figure 103, and customer-specific requirements. Storage test auxiliary cabinet for use as a spillage of liquid test ...
2026-06-11 18:42:53
|
|
... similar to that of probe B of IEC 61032 but having a non-circular stop face with a diameter of 56mm. Technical parameters: Model SN2210-2E Name ...
2026-06-11 18:43:47
|
|
...Test Probe A With Nylon Handle Product Overview: This test probe A conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and ...
2026-06-11 18:47:49
|
|
...Probe Experiment Device Used With The Testing Probe Product Information: This anti-shock probe experiment device is designed and manufactured meet ...
2026-06-11 18:42:51
|
|
...tem-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is ...
2026-06-11 18:48:48
|
|
... Ed.2.1 Test Probe C for Verifying Protection of Water Product information: This probe conforms to standard requirements of IEC 60529 Edition 2.1 ...
2026-06-11 18:47:54
|