321 - 330 of 355
figure 28 impact test equipment
Selling leads
|
...Test Apparatus To Pull Test For Testing Ratings Over 0.2 A Equipment overview: Th coupler lateral pulling test apparatus is manfactured according ...
2026-06-11 18:50:37
|
|
... and figure 12. It is used to check the maximum withdrawal force of electric appliances coupler. The minimum withdrawal force is achieved by ...
2026-06-11 18:50:10
|
|
... is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a ...
2026-06-11 18:50:57
|
|
...1.1,1.2 (IEC 60811-401 and 501), Table 1 IEC 60811-1-1 Figure 12~15, etc. It can be equip with various dumbbell dies according to the needs for ...
2026-09-08 00:29:57
|
|
...Figure 103 Bending Apparatus For Non-Metallic And Composite Conduit Product information: The Bending Apparatus for Non-Metallic and Composite ...
2026-06-11 18:52:19
|
|
...-1:2022 clause 14.1.5, 14.1.6, figure 13, figure 14. It is used to check the maximum force required when the test plug is withdrawn from the socket...
2026-06-11 18:49:02
|
|
Gauge for Checking Non-accessibility of Live Parts, Through Shutter Product information: These two test probes separately confirm to the IEC 60884-1...
2026-06-11 18:53:23
|
|
...-carrying hoses bending resistance tester. Compliance is checked by the following test. The end of the hose intended to be connected to the ...
2026-06-11 18:43:33
|
|
IEC 62196-1 Gauge“A”Guage“B”for Checking Shutters 20N 1N Test Probes Product information: These two test gauges separately confirm to the IEC 62196...
2026-06-11 18:48:31
|
|
IEC 62368 Cl 9.6.2 Fig 47/48/49 Steel Disc Aluminum Ring Aluminum Foil Product Overview: They are the accessories (foreign objects) for testing ...
2026-06-11 18:53:17
|