71 - 76 of 76
figure 1 articulate probe
Selling leads
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC ...
2026-06-11 18:53:18
|
|
...probes separately confirm to the IEC 60884-1:2013 clause 10.5, figure 9 and figure 10. The SN2110 test probe with 20N force is used to test whether ...
2026-06-11 18:53:23
|
|
...10. The SN2211-5 test probe with 20N force and the SN2211-6 test probe with 1N force. Technical parameters: 1. Gauge "A" with force of ...
2026-06-11 18:48:31
|
|
...figure 2 test probe B, it is required by IEC 61851-1 clause 8 and 12.4,etc. Application: This probe is intended to verify the basic protection ...
2026-06-11 18:48:51
|
|
...figure 2 test probe B, it is required by IEC 61851-1 clause 8 and 12.4,etc. Application: This probe is intended to verify the basic protection ...
2026-06-11 18:48:51
|
|
...information: This gauge conforms to the standard requirements of IEC60884-1 clause 21 figure 9 and figure 10, IEC 62196-1:2020 clause 10.2, and etc...
2026-06-11 18:48:52
|