51 - 60 of 458
figure 13 test probe
Selling leads
|
... figure 16, etc. This probe is intended to verify the protection against to glowing heating elements. Probe Dimension: Probe cone part length (mm) ...
2026-06-11 18:50:34
|
|
...: Hair straightener. Test purpose: Used to detect the tension uniformity of the hair straightener. Test principle: Install 10 tension sensors on ...
2026-09-08 00:29:57
|
|
...Test probes for luminous and thermal components 41 Product Overview: This probe meets the requirements of IEC 60335-1 clause 8.1.3, IEC 61032 Test ...
2026-06-11 18:50:59
|
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC ...
2026-06-11 18:53:18
|
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|
|
IEC 60335-1: 2013 cClause 22.12 Figure 13 Small Parts Cylinder Standards & Clauses: This small parts cylinder conforms to IEC60335-1: 2013 clause 22...
2026-09-08 00:29:58
|
|
... shall withstand the lateral strain imposed by equipment likely to be introduced into them. Test sample: Socket-outlets having ratings up to and ...
2026-06-11 18:49:51
|
|
...clauses 15.102 Figure 102 and figure 103, and customer-specific requirements. Storage test auxiliary cabinet for use as a spillage of liquid test ...
2026-06-11 18:42:53
|
|
...Test Device Equipment overview: The coupler heating test device is designed and manufactured according to IEC60320-1 clause 18.2 and figure 13. It ...
2026-06-11 18:50:11
|
|
... similar to that of probe B of IEC 61032 but having a non-circular stop face with a diameter of 56mm. Technical parameters: Model SN2210-2E Name ...
2026-06-11 18:43:47
|