81 - 90 of 942
electrical appliance testing probe
Selling leads
|
...Test Probe A With Nylon Handle Product Overview: This test probe A conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and ...
2026-06-11 18:47:49
|
|
...Test Probe Product overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.3, figure V.1 (but straight ...
2026-06-11 18:50:02
|
|
...Test Apparatus 0.4Mpa Electrical waterproof test Product Information: Standard: Conforms to IEC 60335-2-75 Figure101, .IEC60335-2-64 clause 15.1.1 ...
2026-06-11 18:48:12
|
|
... Ed.2.1 Test Probe C for Verifying Protection of Water Product information: This probe conforms to standard requirements of IEC 60529 Edition 2.1 ...
2026-06-11 18:47:54
|
|
...Ed.2.1 Testing Probe D for Verifying Protection of Foreign Objects Product information: This probe conforms to the standard requirement of IEC ...
2026-06-11 18:47:55
|
|
... and other standards. The stick probe is used to verify the protection of personnel from contact with hazardous parts. It is also used to verify ...
2026-06-11 18:48:06
|
|
...terminals with UL 496:2013 Clause 5.1.3 requirements. It is widely used in electrical safety testing laboratories and quality inspection department...
2026-06-11 18:52:22
|
|
... general purposes- Part1:General requirements" clause 16 and figure 12. Technical Parameter For Coupler Withdrawal Force Test Apparatus: Test ...
2026-06-11 18:50:38
|
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|
|
...Test Probe Of Figure V.3 Product information: The blunt probe of figure V.3 conforms to IEC 62368-1:2018 clause 5.3.2, 5.4.10, V.1.4 and figure V.3...
2026-06-11 18:53:05
|