481 - 490 of 942
electrical appliance testing probe
Selling leads
|
...Probe Intended For Use With A Lampholder Rated Between 600V And 100V Product Overview: This probe conforms to UL 496 2013 clause 4.5.2.1, 4.5.2.2 ...
2026-06-11 18:51:45
|
|
..., IEC60598-1 clause 4.9, etc. This test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as ...
2026-09-08 00:29:58
|
|
...Test Chamber Product overview: The high voltage tracking tester is suitable for testing electrical tracking and erosion resistance of electrical ...
2026-06-11 18:47:19
|
|
... rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
2026-06-11 18:53:03
|
|
...Probe Product Information: The wedge probe conforms to the standard requirement of IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.5 and figure V.4, ...
2026-06-11 18:52:57
|
|
... V.4, IEC 60950-1 Figure naif2 (S5366) and Naf3 (S5370), BS 60950.1108 / 260 / CD and other standard requirements. Used to test whether the slot ...
2026-06-11 18:53:11
|
|
...Test Chamber IP5X & IP6X For Dry Sand Or Circulating Dust Environments Test Product Overview: The 2m³ Dust Test Chamber is designed in accordance ...
2026-06-11 18:47:06
|
|
...Immersion Test Chamber For Factory Inspection Use Product information: The high pressure water tank is used to verify the protective performance of ...
2026-09-08 00:29:58
|
|
...Test System Open Type IPX5 IPX6 Hose Nozzles Water Stream Jet PLC Test System with Stainless Steel Water Tank Overview: The IPX5 and IPX6 jet ...
2026-06-11 18:47:45
|
|
...test Equipment Fire Risk Assessment Apparatus Overview: This fire hazard test device simulates the thermal stress caused by the heat source or ...
2026-09-08 00:29:57
|