711 - 720 of 1285
electrical appliance testing equipment
Selling leads
|
... to IEC60598-1 clause 4.4.4 Product Overview For Fluorescent Lamp Holder Axial Force Test Device: It is applicable to axial pressure is applied to ...
2026-05-03 00:14:56
|
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull ...
2026-05-03 00:14:57
|
|
...Test Apparatus IEC 62196-1 Product InformationN For Vehicle Switch-Outlet Interlock Withdrawal Force Test Apparatus: This test equipment conforms ...
2025-03-06 22:31:00
|
|
...Test Apparatus For Vehicle Connector IEC 62196-1 Product Information For Withdrawal Force And Latching Verification Test Apparatus: This test ...
2025-05-28 22:34:26
|
|
... 11, IEC60065 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.2 etc. Application for Strain Relief Test Apparatus: The device is used ...
2025-03-06 22:31:58
|
|
... Drop Strength Test Drop height 30～1500mm Product Information: This test equipment is used to test the drop strength and safety requirements of ...
2025-03-06 22:28:43
|
|
IEC 62752 Clause 9.34 Vehicle Drive Over Testing Machine For Plug Or Vehicle Connector Test Product information: The test equipment is used to check ...
2026-05-03 00:14:57
|
|
...:It is used to test the enclosure mechanical strength of audio, video and similar electronic apparatus.Test sample: Audio, video and similar ...
2024-12-09 20:37:44
|
|
...being tested under 11.6kPa (1.68psi). To judge the test result on condition of no explosion, flame, smoke, electric leakage after test. And the ...
2024-12-09 19:10:13
|
|
...Test Current and Temperature Rising Test System Test Current 6500A Product Overview This advanced test system complies with IEC 62196-1Ed.4CDV 2020 ...
2026-05-03 00:14:57
|