241 - 250 of 650
electrical appliance stability tester
Selling leads
|
....5 IEC60068-2-75:2014 “Environment testing for electric and electronic products Part2: Test methods -Test Eh: Hammer tests IDT” IEC60335-1:2016 ...
2026-06-11 18:40:53
|
|
...-2-6-2002 clause 11.101 figure 104, etc. It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of ...
2026-06-11 18:41:06
|
|
...used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for ...
2026-06-11 18:41:58
|
|
... required by many test standards, such as IEC 60998-1, VDE 0620. It is intended for testing the temperature rise under normal operation of ...
2026-06-11 18:50:01
|
|
IEC 60335-2-25 Micro Oven Door Opening and Closing Testing Equipment Product overview: The microwave oven door opening and closing test equipment ...
2026-09-08 00:29:57
|
|
... and figure 12. It is used to check the maximum withdrawal force of electric appliances coupler. The minimum withdrawal force is achieved by ...
2026-06-11 18:50:10
|
|
IEC 60335-2-25 Clause 18 Microwave Oven Door Endurance Test Equipment Brief Introduction: It is conforms the standard of IEC60335-2-25:2006 clause 18...
2026-09-08 00:29:57
|
|
... is used with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected ...
2026-06-11 18:50:27
|
|
IEC 60065 Clause 5.1 Label Marking Abrasion Test Equipment Product information: This label marking abrasion test equipment is designed and manufacture...
2026-09-08 00:29:58
|
|
..., etc. This device is used for household and similar purpose fixed electrical appliance switch, plug and socket, coupler for on-off ability, ...
2026-06-11 18:50:28
|