51 - 60 of 100
connectors and plugs vehicle testing equipment
Selling leads
|
Vehicle Switch-Outlet Interlock Withdrawal Force Test Apparatus IEC 62196-1 Product InformationN For Vehicle Switch-Outlet Interlock Withdrawal Force ...
2026-06-11 18:49:01
|
|
... 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle ...
2026-06-11 18:48:35
|
|
... chamber is required by IEC 60068-2-14 (Test Na) and it is required by IEC 62196-1Ed.4CDV 2020 clause 34.3. The hot and cold impact (thermal shock) ...
2026-06-11 18:48:33
|
|
...Plug And Vehicle Connector Drop Test Machine Product information: The test device complies with the requirements of IEC 62196-1Ed. 4CDV 2020 ...
2026-09-08 00:29:59
|
|
... 14.1.6, fig13, fig14, table 5.It is used to check the maximum force required when the plug is pulled out of the socket-outlet or connector. ...
2026-06-11 18:48:32
|
|
...Test Apparatus For Vehicle Connector IEC 62196-1 Product Information For Withdrawal Force And Latching Verification Test Apparatus: This test ...
2026-06-11 18:49:04
|
|
... contacts of hardened steel, having a surface roughness not exceeding 0,8 µm over their active length and spaced at the nominal distances, with a ...
2026-06-11 18:49:27
|
|
... strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle: The free end of the cable and an ...
2026-09-08 00:29:59
|
|
... of electric vehicles - Part 1: General requirements" Section 7.11.3 GB/T11918.1-2014 Chapter 24.3. Samples and restrictions: Charging gun ...
2026-09-08 00:29:59
|
|
...Test Apparatus Test EV Charging Interface Product Information: This pull force and torque test equipment is used to test the vehicle plugs, and ...
2026-09-08 00:29:59
|