151 - 160 of 438
ceramic pressure test apparatus
Selling leads
|
... to IEC 60884-1: 2022 Annex C alternative gripping tests figure C.2, the reference plug as per C.1 also below shown: Technical Parameters For Plug ...
2026-06-11 18:50:42
|
|
...-2-10, IEC60695-2-11, IEC60695-2-12 IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress ...
2026-06-11 18:47:12
|
|
...Test Apparatus Product information: It is used for resistance test to torque of cookware handle. The torsion deformation of the handle in all ...
2026-06-11 18:41:16
|
|
...Resistance Test Apparatus Product information: It is used for testing resistance to pull on cookware handles. When the handle is subjected to ...
2026-06-11 18:41:17
|
|
... 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle ...
2026-06-11 18:48:35
|
|
...Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have ...
2026-09-08 00:29:59
|
|
...Test Apparatus Product information: The testing system is required by IEC 62368-1:2018 clause Y.5, etc. It is used to verify the protective ...
2026-09-08 00:29:59
|
|
IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test ...
2026-09-08 00:29:59
|
|
...-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professiona...
2026-09-08 00:29:58
|
|
...Testing Apparatus Product information: This device meets the standards of IEC60884-1 clause28.1.2 figure 40. It is applicable to test improper ...
2026-06-11 18:42:45
|