21 - 30 of 114
75n finger test probe
Selling leads
|
... by many standards such as IEC60529 for IP4 testing, IEC 60335-1, IEC60065 and etc. This test probe D is intended to verify the protection of ...
2026-06-11 18:42:03
|
|
...Test Probe 1 Figure 5 Ф50mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 test ...
2026-06-11 18:42:03
|
|
...Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test Product information: This probe conforms to standard requirements of IEC 61032 ...
2026-06-11 18:42:04
|
|
...Test Probe D with 1N Force For IP4X And Shock Hazard Verification This precision test probe conforms to IEC61032 Figure 4 Test Probe D standards, ...
2026-06-11 18:43:58
|
|
...Test Probe A With Nylon Handle Product Overview: This test probe A conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and ...
2026-06-11 18:47:49
|
|
...Probe Experiment Device Used With The Testing Probe Product Information: This anti-shock probe experiment device is designed and manufactured meet ...
2026-06-11 18:42:51
|
|
...Test Probe A For Hazardous Parts Test Product Overview: It conforms to the standard requirements of IEC 61032 figure 1, IEC 60529 IP1 and IEC 60065...
2026-06-11 18:42:01
|
|
...tem-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is ...
2026-06-11 18:48:48
|
|
... 60529 IP2X. It features an M6 threaded hole at the end of the handle, allowing it to be connected to a force gauge for precise testing application...
2026-06-11 18:43:29
|
|
... Ed.2.1 Test Probe C for Verifying Protection of Water Product information: This probe conforms to standard requirements of IEC 60529 Edition 2.1 ...
2026-06-11 18:47:54
|