IEC 62196 Automatic Air Tightness Detection Testing Machine
Overpressure Testing 10L
Product Information:
Standard: According to IEC62196-3-1 Clause 101.6 Overpressure Test.
Samples and restrictions: Test sealing performance test for volumes
below 10L.
Application: Used to perform pressure leakage tests on
sealing-required appliances containing liquid coolants.
Test principle: According to the different pressures of the sample,
the system's booster pump outputs high pressure to verify the
pressure of the sample.
Structure and features: It consists of an electrical control
system, a pressure control system and a water tank. The work pieces
are manually installed and connected.
Usage environment:
Power supply: AC220V±10%/50-60Hz
Air source: 0.5-0.8MPa compressed air
Place of use: atmospheric pressure 80~106kpa; ambient temperature
5~40°C; relative humidity (20~80) %RH; no violent shaking,
vibration, no electromagnetic interference, no dust, no explosive
and corrosive gases, good heat dissipation
Technical Parameters:
| Test station | Single station | | Electrical control method | Computer intelligent control and operation | | Test pressure | 1.0-10.0Bar, booster pump drive
| | Pressure control accuracy | +1% of the upper limit of the test pressure value, -1% of the lower
limit | | Display accuracy | 0.1 Bar | | Test medium | Dry air | | Pressure control method | Computer control | | Boost rate | Adjustable, non-uniform linear | | Compress time | 0-9999s can be set arbitrarily, with seconds as the timing unit,
computer display | | Test process | Boost-Pressure-Relieve Pressure | | Driving air pressure | 0.2-0.8MPa | | Volume size | Less than 10L | | Water tank size | WDH=500×500×1000mm | | Output Interface | ZG1/4 internal thread | | Pressure curve display | Real-time display of data acquisition software | | Test data storage | Reports and excel test forms can be saved | | Computer | Intel i7 4 G memory (or above) 512G SSD,windows7 operating system
and OFFICE processing software, with RS232 communication interface | | Safety protection device | | Power supply | Leakage protection, overload and short circuit protection | | Motor | Overload, short circuit protection |
|
