UL 1642 FIG. 20.1 Single Station Lithium Battery Fire Exposure Tester
|
Detailed Product Description
UL 1642 FIG. 20.1 Single Station Lithium Battery Fire Exposure
Tester Overview: This instrument complies with UL2054 Article 22 (Figure 22.1), UL
1642-2009 Article 20 (Figure 20.1), GB 31241-2014 Article 7.9
(Figure E.2). Battery fire exposure tester is a necessary test equipment for
battery manufacturers and quality inspection departments. The
equipment is characterized by easy operation, safety and
reliability, and high precision. It is the ideal test equipment for
battery combustion and ejection test. Technical Parameters:
Features: PLC and touch screen are used for control and operation. The exhaust port opens automatically when there is smoke alarm, and
the exhaust port closes with delay when there is no smoke. Ignition unsuccessful alarm and cut off steam source. Built-in illuminator, through external reflection, to ensure the
service life and safety of the illuminator, etc. High-definition camera and visualization window enable the operator
to clearly observe the changes of the measured object in the
experiment. Adopting explosion-proof glass with steel mesh for double
protection. Controlled by remote control, the longest distance can be up to 10
meters.
Test procedures: Place the test cell on a flat surface and cover it with a lid that
has a 4-inch diameter hole in the center. The lid is made of wire
mesh or 0.017 in (0.43 mm) wire with 20 holes per foot. An 8-sided,
2-foot (610 mm) wide, 1-foot (305 mm) high screen is placed around
the sample. The wire mesh consists of 0.010-inch (0.25-millimeter) wire with 16-18 wires per inch. The sample is placed on the wire mesh, covering the hole in the
center of the bench, and then heated until the sample explodes or is destroyed. The safety valve is oriented parallel to the asbestos
cloth. ACCEPTANCE: The exploded cell did not partially penetrate the
screen and the cell did not protrude partially or completely
through the screen.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: Lithium Battery Fire Exposure Tester Single Station Fire Exposure Tester |
Related Products
![]() |
High-Safety Battery Heavy Impact Test Machine Impact Weight 9.1KG UN38.3 |
![]() |
UL 2054 Battery Heavy Impact Test Machine 9.1±0.1KG Impact Weight 1000mm Height |
![]() |
Hydraulic Vertical Shock Test System With Half-Sine Waveform Generator |
![]() |
EN 50604-1 Mechanical Shock Test System Impact Tests Of Half Sine Wave For Battery Cells |
![]() |
EN 50604-1 Battery Vibration Test System for Cell Pack Impact & Reliability Testing |
![]() |
Battery Mechanical Shock Test System Half-Sine Sawtooth Square Wave Shock Tests |
Email to this supplier