High-speed auto blow molding machine ABLB45II
ABLB45II fully automatic blow molding machine was specialily
designed for the small volume products.It can meet the production
of plastic bottles from 5ml to 2L. A widely kinds of plastis
meaterial can be used for this machine,which can meet the
production of two,three or four products at the same time for mass
production. Tidy frame and long-lived components and ideal cycle
can reach 4.6 second.. This mahine is very small with fullly
automatic process with high efficiency,easy and safe to operate.
The die head system adopts central-incoming extrusion die made of
made of special steel to ensure the quality of products. The
control system consits of PLC and human machine and interface
imported from Mitisubishi Japan.Schneider s contactor, Omron s
auxiliary reply,Taiwan s PID temperature control module and
imported hydraulic parts.
For more information and inquery. Please contact us.
| Max. Product volume | 2 liters | Dry cycle | 950X2pc/h |
| Screw diameter | 55mm | Screw L/D ratio | 24 L/D |
| Screw drive power | 15 KW | Screw heating capacity | 5 KW |
| No.of heating zone | 3 zones | Output of HDPE | 60 KG/H |
| Oil pump drive power | 5.5 KW | Clamping force | 32 KN |
| Max.size of mold | 250X320mm | Mold stroke | 80-350mm |
| Max.die diameter | 80mm | Blow pressure | 0.6mpa |
| Air volume | 0.6 M³/MIN | Cooling water pressure | 0.3mpa |
| Water consumption | 60 L/MIN | | |
PLC adds the man-machine interface, the touching type is operated,
it is convenient to be simple and direct.
One pair of Iow plastification systems of Senior One,
energy-efficient,mix and smelt outstandingly.
The centre enters the material, the pushing out of the mould head
of many patterns, remove and make and converge the line completely,
meet the demands of different structure products.
Two parallel, the mould organization of translation, the centre
locks the mould, balance the strength of receiving,move rapidly,
put it in place gentlely.
