ABLB55II is low cost,energy save and high quality blow molding
machine.Suitable for oil bottles,shampoo bottles,chemical
bottles,milk bottles and related product not over 3.5L.Adopt high
quality Mico Computer PLC controler and temperature controler from
Mitisubishi Japane to ensure the good funciton of the mico
system..Equip with sliencer and oiling system to reduce noise and
friction.
The max.size for mold: 320x300x200(mm)
Output: 1 cavity for 3.5L(the max.volume of plastic bottles)
4 cavity for 50ml(the mini.volume for plastic bottles)
For more information,please don t hesitate to contact us.
Related technical parameter:: (ABLB55II)
| Max. Product volume | 3.5 liters | Dry cycle | 1100pc/h |
| Screw diameter | 55mm | Screw L/D ratio | 24 L/D |
| Screw drive power | 15 KW | Screw heating capacity | 5-6 KW |
| No.of heating zone | 3 zones | Output of HDPE | 60 KG/H |
| Oil pump drive power | 7.5 KW | Clamping force | 45 KN |
| Max.size of mold | 320X360mm | Mold stroke | 148-508mm |
| Max.die diameter | 140mm | Blow pressure | 0.6mpa |
| Air volume | 0.5 M³/MIN | Cooling water pressure | 0.3mpa |
| Water consumption | 40 L/MIN | | |
PLC adds the man-machine interface, the touching type is operated,
it is convenient to be simple and direct.
One pair of Iow plastification systems of Senior One,
energy-efficient,mix and smelt outstandingly.
The centre enters the material, the pushing out of the mould head
of many patterns, remove and make and converge the line completely,
meet the demands of different structure products.
Two parallel, the mould organization of translation, the centre
locks the mould, balance the strength of receiving,move rapidly,
put it in place gentlely.
