Diameter 1000mm Random Packing Support Plate Tower Internal 1.Random packing supporting plate grid plate type and beam type The main purpose of the packing support plate is to support the
packing in the tower, and at the same time to ensure the smooth
passage of gas and liquid phases. If the support plate is not
designed properly, flooding will first occur on the support plate.
For ordinary packing, the free cross-sectional area of the support
plate shall not be less than 50% of the total tower cross area, and
shall be greater than the free cross-sectional area of the packing
layer. The basic requirements are: 1. It has enough strength and rigidity, and can support the quality
of packing and liquid holding as well as the operating pressure,
etc;2. It has an opening ratio greater than the void ratio of the
packing layer to prevent flooding at this position;3. The structure is reasonable, which is conducive to the uniform
distribution of gas and liquid phases, small resistance and easy to
disassemble. The commonly used packing supporting devices are grid plate type,
beam type, etc. The selection of the supporting device depends on
the tower diameter, packing type and the range of gas and liquid
flow. The packing supporting grid plate composed of parallel slats is
simple in structure and convenient in manufacture, which is
commonly used in small tower. Grid type support plate is only used
in small tower because of its small opening rate and bigger flow
resistance to gas and liquid than other types. At present, the best supporting device for random packing is beam
type supporting plate, which adopts beam type gas jet structure. It
is composed of beam-shaped elements, which are perforated on steel
plates with many long holes. The support plate is of gas-liquid
split type, in which the gas is ejected from the holes at the upper
part of each beam element, while the liquid flows down from the
holes at the lower part, avoiding the increased resistance when the
gas-liquid flows reversely through the same hole. Moreover, it can
provide more than 100% of the free cross-sectional area of the
tower, so gas-liquid flow resistance is small, and it is conducive
to gas-liquid redistribution. The flow capacity of the support
plate can reach 200 m3 / (M2 · h), and the maximum pressure drop is only 69 Pa. 2. The support beam arrangements according to tower inner diameter
(part table): Item | Inner Dia.mm | Support Plate Dia.mm | Support Plate Sections | Support Ring Widthmm | Support Ring Thicknessmm | 1 | 300 | 290 | 2 | 30 | 10 | 2 | 400 | 380 | 2 | 30 | 10 | 3 | 500 | 480 | 2 | 30 | 10 | 4 | 600 | 580 | 3 | 30 | 10 | 5 | 700 | 680 | 3 | 30 | 10 | 6 | 800 | 780 | 3 | 40 | 10 | 7 | 900 | 880 | 3 | 40 | 10 | 8 | 1000 | 980 | 3 | 40 | 10 | 9 | 1100 | 1080 | 4 | 40 | 10 | 10 | 1200 | 1160 | 4 | 50 | 10 | 11 | 1300 | 1260 | 4 | 50 | 14 | 12 | 1400 | 1360 | 4 | 50 | 14 | 13 | 1500 | 1460 | 5 | 50 | 14 | 14 | 1600 | 1560 | 5 | 50 | 14 | 15 | 1700 | 1660 | 5 | 50 | 14 | 16 | 1800 | 1760 | 6 | 50 | 14 | 17 | 1900 | 1860 | 6 | 50 | 14 | 18 | 2000 | 1960 | 6 | 50 | 14 | 19 | 2100 | 2060 | 7 | 50 | 14 | 20 | 2200 | 2160 | 7 | 50 | 14 | To be continued. |
When the tower inner diameter is over 2600mm, main bearing beam
under the beam supporting plate is required. 3. Applications Distillation towers, scrubbing towers, steam drum, evaporators,
knockout drum, sulfuric acid plants, petrochemical plants, flue gas
desulfurization, refineries,LNG plants,etc.4. FAQ What's the delivery time? 2-5Days. We will do our best to send the products to you as soon as
quickly. What's the payment terms? Flexible and diverse payment terms can be chosen 5. Random packing support plate position and simple drawing:
Welcome your contact with your private tower internals plan or
ideas!
|