High Precision ADC12 ADC10 Aluminium Gravity Die Casting Machinery Parts

High Precision ADC12 ADC10 Aluminium Gravity Die Casting Machinery Parts

Permanent mold casting is a metal casting process that employs reusable “permanent” metal molds. It is often referred to as gravity die casting because metal is typically poured into the die under gravity-induced pressure instead of using forcible injection. Some manufacturers use other processes as well, such as pouring molten metal under high gas pressure or vacuum pressure.

Permanent mold casting is used primarily for high-volume production of smaller to mid-size metal parts that are required to have uniform wall thickness. They can be manufactured out of magnesium, aluminum, copper and many metal alloys, and weigh anywhere from 1.5 ounces to 150 lbs. Since permanent mold casting has only a moderate ability to produce intricate details, it is best used for structurally simpler parts.

Examples of metal parts frequently created in large production runs using permanent mold casting include: pipe fittings, cylinder blocks, cylinder heads, gear blanks and housings, connecting rods, and automotive components such as wheels, pistons and impellers.

Aluminium Gravity Die Casting Description

Transportation, Agricultural machinery equipment, Construction machinery, Water conservancy facilities, Space flight and aviation, Chemical machinery, Sea carriage and so on.

Manufacture Process

1. Review the part design,drawings and quality standard from clients.
2. Mould and Tooling design & manufacturing
3. Mould and Tooling testing & confirm the sample
4. Die casting raw castings
5. Surface treatment: Trimming,Deburring, polishing, cleaning, passivation & power coating and other requirement from Customer
6. Precision machining: CNC lathes, milling, drilling, grinding etc
7. Full Inspection
8. Packing
9. Delivery

Our Advantages

1. We are the biggest lost foam mould manufacturer in China, we focus on high challenge lost foam mould and we have large gantry machining centers,30 sets imported high speed machining center,more than 40 sets general machine tool equipment;
2. We have 36 senior mould designers, to ensure reasonable / safety / high efficiency mould design and ensure the fast mould delivery and rational mould structure, make the process more safer and the production efficiency more higher;
3. We using numerical control machine tool to manufacture the mould cavities, to ensure a even thickness ;
4. We using ZL104 Aluminium to casting the mould, to manufacture a high strength mould;
5. For the big mould, we using Ø22*1 copper tube as cooling pipe, with water spray system, to get a nice cooling effect;
6. We Have (TEF10N) coating on the mould surface, it can reduce the friction, anti water/static electricity/acid-base/high-temperature, with this we can ensure the pattern has smooth surface without distrotion, and easy to demould;
7. All the screws we using stainless steel screw, easy to disassemble during maintenance;
8. For the big mould chest, we using 18-20mm thick wrought aluminium plate, to offer high strenght cavity ;
9. For the complex mould which is difficult to demould, we can manufacture the automaitc mould with take out device ;
10. We produce the pattern sample to customer after finish the mould, when the pattern was qualified, then we do exceptance job for the mould ;
11. We have the Hexagon coordinate measuring instrument imported from the Switzerland to have a test make sure our mould qualified.