61 - 70 of 281
precise cutting rotary burr set
Selling leads
|
... 89-92.5 speed of tool : 15000-25000Turn/min Material : Tungsten Carbide Certificate : ISO9001:2008 How to use the carbide burrs 1.Speed /RPM The ...
2025-07-27 00:11:09
|
|
...Rotary Burr Single Cut The carbide rotary burrs serrated shape is fine, and the surface finish is good. It is suitable for processing hardened ...
2024-12-09 13:03:52
|
|
Alu Cut, Point Grinding, Single Cut, Double Cut, Fine Cut, Diamond Cut 45mm Shank Rotary Burrs For Iron, Steel Iron Tungsten carbide burrs offer a ...
2024-12-09 13:18:21
|
|
...h end cut for interior contour work and face milling. 6mm (about 1/4'' inch) shank carbide bit set fits most pneumatic tools and rotary die ...
2025-07-27 00:11:09
|
|
...ROTARY BURR SILVER WELDING SHARP FAST CUTTING TOOLS BURS How to use the carbide burrs 1.Speed /RPM The speed at which you use your carbide bur in ...
2024-12-09 13:00:26
|
|
...complete range of 1/4”or 6mm shank burr bits, which are offered in both inch and metric sizes. They are used on air die grinders(pneumatic rotary ...
2025-07-27 00:11:09
|
|
... Rotary Burrs Cylinder With Endcut Flat cut "Ordinary cutting" is usually used for steel, steel alloys, cast iron, copper and brass. Designed for ...
2025-07-27 00:11:09
|
|
Full Size F Shape SF-5M Double Cut Tungsten Carbide Rotary Burrs Cutting Tools Part Product Application: Tungsten carbide burrs are widely used in ...
2024-12-09 12:58:28
|
|
... supplies a complete range of 1/4”or 6mm shank burr bits, which are offered in both inch and metric sizes. They are used on air die grinders...
2025-07-27 00:11:09
|
|
...Cut Tungsten Carbide Bur , Carbide Rotary Files YG6 / YG8 / YG10x Introduction of Elliptical cylinder carbide burr/ Oval shaped /TRE burrs Using ...
2024-12-09 17:39:46
|