Fine Cut, Double Cut, Single Cut, Aluminum Cut Cylindrical Burrs
Size
Tungsten carbide burrs come in a variety of sizes to suit different
applications. Choosing the right size will depend on the job at
hand. Generally smaller burrs are used on smaller applications for
producing finer, smoother work. Larger burrs are for higher, faster
stock removal and are more often used on larger jobs.
Speed
The rotary tool speed you use will depend on the metal and
size/type of burr used. For optimum performance and results it is
always best to check the manufacturer recommendations for the
correct RPM to use with each metal burr. Ideally you will start off
at a lower speed and increase as you go along, however if you find
your burr is chipping it is a sign you are going too slow. Here is
a general rotary tool speed guide
Technique
For the best results, and to make your burr last longer, make sure
you don't use too much pressure while cutting. Too much pressure
will cause the cutting edges of the flutes to chip and become
smooth prematurely, reducing the life of your burr .
You will also want to ensure you keep the burr moving around the
cutting area as much as possible. If the metal burr is left still
for too long this can cause clogging and stop it from digging and
jabbing into the job, leaving a rough job with visible marks.
High Quality Products with Cometitive Price and Excellent Service
We adhere to the"Comprehensive,high quality,Efficiency"of the
service standards, to customer satisfaction as the goal,we would
like to make commitments as below:
1.The formation of strong technical R & D service team, to
provide customers with technical communication, quality control,
after service and whole course technical support.
2.Our company has wealthy experience of product design, production
and application. Providing customers with reliable, economical and
reasonable optimal solution according to the special needs of
customers.
