Cleated Conveyor Belt Sidewall Belt Conveyor Inclined Slop Claming
Belt Machine
General
This Sidewall belt conveyor with corrugated shield, in particular
applied in conveying material in big inclination, for it with
corrugated shield and horizontal clapboard belt. And it can widely
used in coal, metallurgy, chemical industry, light industry,
petroleum, port, mechanical etc to convey all kinds of bulk
materials and the piece.
Density of handled bulk materials 500~2500kg/m3, max inclination is
90°, max lump size is 550mm, lump of handled should depends on belt
width, belt speed, clapboard height and inclination.
Ambient temperature generally -25~+40℃, material temperature to be
handled should be under 50℃. It should take other measures for
special requirement such as heat resistant, proof cold, resistant
retard, resistant acid and alkali, resistant abrasion, proof
explosion, proof water etc.
Advantages And Features
Application
Continuous conveying equipment for general purpose bulk materials
Widely used in coal, chemical industry, building materials,
metallurgy, electric power, light industry, food, port, shipping
and other industries.
In the working environment that the humidity is -15 degree to +40
degree, transport a variety of bulk materials which density is
0.5-2.5t/m3.
Max inclined angle is 90°, max pellets size is 550mm.
Technical parameters for reference
Remarks: the below capacity is based on coal and speed 1m/s
to caculated for reference.
| Bandwidth | 650mm |
| Cleats hight | 80mm | 120mm | 160mm |
| Pitch of cleats | 126mm | 252mm | 126mm | 252mm | 378mm | 252mm | 378mm |
| Slop | 30 degree | 59 t/h | 32 t/h | - | 78 t/h | 52 t/h | 105 t/h | 73 t/h |
| 40 degree | 47 t/h | 24 t/h | - | 60 t/h | 40 t/h | 85 t/h | 56 t/h |
| 50 degree | 37 t/h | 19 t/h | 90 t/h | 48 t/h | - | 68 t/h | 45 t/h |
| 60 degree | 31 t/h | 16 t/h | 75 t/h | 39 t/h | - | 55 t/h | 36 t/h |
| 70 degree | 25 t/h | - | 62 t/h | 32 t/h | - | 45 t/h | 30 t/h |
| 90 degree | 15 t/h | - | 38 t/h | - | - | 28 t/h | - |
Operation regulation and maintenance
- Belt conveyor should be operated in according to design
requirement.
Belt conveyors are not allowed to overload run.
All safe alarming should be in good condition.
Walkway of emergency switch should be free. The switch should be
regular inspected to see whether they are in good condition.
All transition load point should have enough light facilities.
Fence should be provided under gravity type tensioning devices and
the area where man easily access.
