| Clause | Measurement/testing | Testing / measuring equipment / material needed | Subcontracting |
| 3.4 | Test of marking | Piece of cloth Water Petroleum spirit | R |
| 4.4.4 | Lampholder pressure test | Test caps Pressure device Torque driver | R |
| 4.4.5 | Voltage across lampholders | High voltage probe / Oscilloscope | R |
| 4.11.6 | Electro-mechanical contact system | Low voltage variable current power supply, voltmeter, high voltage transformer | R |
| 4.12.1/4.12.5 | Screws and connections (mechanical) and glands testing | Test screwdriver or spanner Test rods | R |
| 4.13.1/4.13.4 4.13.6/4.21.4 | Mechanical strength tests | Spring-operated impact test apparatus Apparatus for ball impact tests Conditioning cabinet (e.g. freezer) Angle measuring device Weighting device Tumbling barrel test equipment | R |
| 4.14.1/4.14.2/ 4.14.3 | Adjusting devices testing | Glass test shelves Weighting device Test apparatus for adjustable devices | R |
| 4.9.2/4.18.1 | Insulating linings and sleeves tests / Resistance to corrosion | Heating cabinet, humidity cabinet, megaohmeter, high voltage transformer | R |
| 4.18.2 / Annex F | Stress corrosion | Closeable glass vessel test solution Heating cabinet Facilities to wash samples after test | R |
| 4.20 | Rough service luminaires | Vibration test equipment | S |
| 4.22 | Attachment to lamps | Weighing device | R |
| 4.24/Annex P | Protective measures against UV radiation | UV radiation test instruments | S |
| 4.26 | Short circuit protection test | Test chain Weighting device | R |
| 5.2.10.1 | Pull and torque tests on cord anchorage | Cord anchorage tests apparatus (pull and torque) | R |
| 5.3 | Internal wiring dimensions | Micrometer Equipment for insulation thickness | R |
| 7.2.3 | Earth continuity test | Earthing test equipment | R |
| 8.2.5 8.2.7 | Protection against electric shock tests / Capacitor discharge | Standard test finger (IEC 60529) Unjointed test finger Voltmeter oscilloscope | R |
| 9.2.0 | Solid object proof luminaire testing | IP 3X (2,5 mm) IP 4X (1 mm) probes | R |
| 9.2.1/9.2.2 | Dust proof luminaire tests | Apparatus for proving protection against dust | R |
| 9.2.3,4,5,6,7, 8,9 | Water proof luminaires testing | Apparatus for protection against water tests IPX 8 | R |
| 9.3.1 | Humidity tests | Humidity cabinet | R |
| 10.2.1 | Insulation resistance tests | Megaohmmeter | R |
| 10.2.2 | Electric strength tests | High voltage transformer Dummy lamp | R |
| 10.3.1 | Leakage current testing | Leakage current tester | R |
| 11.2.1 | Creepage distances and clearances measurements | Sliding caliper | R |
| 12.3.1 | Endurance tests | Thermal cabinet (35°C) Endurance test equipment Multimeter Wattmeter | R |
| 12.4.1 | Thermal tests | Draught-proof enclosure (25°C) Thermometer Thermocouples Voltage stabilizer Multimeter Wattmeter | R |
| 12.5.1e) Annex C Fig. C3 | Abnormal operation testing | Test circuit for metal halide luminaires | R |
| 13.2.1 | Resistance to heat test | Ball pressure test apparatus Heating cabinet | R |
| 13.3.1 | Resistance to flame test | Needle flame test apparatus | R |
| 13.3.2 | Resistance to ignition testing | Glow-wire test apparatus | R |
| 13.4.1 | Resistance to tracking test | Proof tracking test device | R |
| 14 | Screw terminals | Torque drivers, test cables, pull device, micrometer, timer | R |
| 15 | Screwless terminals | Pull device, variable current source, voltmeter, heating cabinet, timer, test cables | R |
| | | | | |
