1J Pendulum Hammer Impact Test
|
Single And Adjustable Energy Spring Hammers For Impact Testing
Technical parameters:
Product details: This spring impact test conforms to the standard requirements of IEC60068-2-63,IEC60068-2-75,IEC60335 and IEC60598. As required in the standards, it is used to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the product is examined with accessibility probes to determine access to shock, energy, and injury hazards.
Method of application:
Notice: A. After calibrating the device, don’t disassemble it or adjust the compression amount of the spring. B. If the compression amount of the springs is adjusted, the device must be checked by the measurement department before being used. Otherwise, the accuracy of testing results will be directly influenced. C. In order to prevent changes of impact energy caused by misadjustment, the products have been sealed in the factory. If you have any question, please contact our factory, who will provide you three guarantees and post-technical services. D. Measures should be taken to prevent the rust of the hammer spring (drying moistureproof processing). E. Requirements for environmental conditions: temperature 5~35℃, humidity 45 ~ 75%. |
||||||||||||||||||||||||||||||
Product Tags: 1J Pendulum Hammer Impact Test 0.7j Pendulum Hammer Impact Test 0.2j pendulum hammer |
![]() |
Impact Testing Apparatus Striking Element |
![]() |
SGS Impact Hammer Test Equipment |
![]() |
1J Pendulum Hammer Impact Test |
![]() |
Electronic Control Impact Testing Apparatus , IEC 60950-1 Ball Drop Test Equipment |
![]() |
Vertical IEC60598 220 Volt Steel Ball Drop Impact Test |
![]() |
IEC62262 Impact Testing Apparatus , 20J Pendulum Hammer Impact Test |