131 - 140 of 212
water treatment digital ph controller
Selling leads
|
... but not limited to PH, ORP, conductivity, salinity, TDS, dissolved oxygen, turbidity, MLSS, transparency, COD, TOC, residual chlorine, ammonia ...
2024-12-09 20:08:54
|
|
... with good water quality and few pollutants have low conductivity. Conductivity maintenance is far less than pH and minimum calibration for boiler ...
2024-12-09 21:09:09
|
|
...Controller Modbus RTU For Drinking Water Treatment Introduction Chlorine dioxide sterilization is an internationally recognized high-efficiency ...
2024-12-09 20:08:54
|
|
..., TDS and temperature in water. Specification: Model DUC2-EC-H-A Software Version DRFN EC Analysis software V1.0 Sensor Input Compatible with all ...
2024-12-09 20:34:57
|
|
...Controller For Wastewater And Sewage Treatment Brief Introduction COD (chemical oxygen demand) is often used as an index to measure the amount of ...
2026-09-08 00:23:02
|
|
...Water Product Introduction Peracetic acid (C2H4O3) is a bright, colorless liquid that has a piercing odor and a low pH value. Peracetic acid is ...
2024-12-09 20:08:54
|
|
... level in drinking water. Turbidity refers to the content of suspended particles or pollutants in water, and is an important indicator for ...
2024-12-09 22:47:13
|
|
Digital Conductivity Sensor Salinity With 4 Electrodes For Wastewater Treatment The digital conductivity sensor C4E is designed with smart digital ...
2024-12-09 20:08:54
|
|
...expressed in milligrams of oxygen per liter of water. The amount of dissolved oxygen in water is an indicator of the self-purification ability of ...
2026-09-08 00:23:02
|
|
... for detecting physical, chemical, biological. MCC200-A4 can connect any 1-4 different types of Daruifuno digital sensors at the same time, max can ...
2026-09-08 00:23:02
|