211 - 220 of 226
pt1000 ph electrode sensor
Selling leads
|
... indicator of water quality.It can reflect the degree of electrolytes present in the water. Conductivity sensors can be divided into electrode type ...
2024-12-09 20:08:54
|
|
..., and lead acids are tolerated. You can calibrate the sensor via analytical determination by DPD-method at the controller. The pH range of the ...
2024-12-09 20:08:54
|
|
Electrical Isolation RS485 Interface ORP Probe For Water Treatment Monitoring Oxidation-reduction potential, ORP (the abbreviation of Oxidation...
2024-12-09 20:33:46
|
|
Flat Platinum Detection Head ORP probe for Electroplating And Mining ORP stands for Oxidation-Reduction Potential, which is measured in millivolts and ...
2024-12-09 20:51:50
|
|
... is amperometric 2-electrode system with surfactant-resistant membrane. The interference of the measurement is O3, Cl2 does not interfere. The size ...
2024-12-09 20:08:54
|
|
.... The water quality sonde is non-membrane-covered, amperometric potentiostatic 3-electrode system. Sensors without membranes are less susceptible ...
2024-12-09 20:08:54
|
|
...digital sensor. The sensor uses the ion electrode method to measure ammonia nitrogen in the water. Specification: Model DUC2-NH4-H-A Software ...
2026-06-22 00:32:34
|
|
... can replace the measuring electrode with different K-constant to realize the different measuring requirements. At the same time, the measuring ...
2024-12-09 20:08:54
|
|
...water. Using the principle of electrochemical sensing, the electrochemical reaction of oxygen on the surface of the electrode is used to measure ...
2026-06-22 00:32:34
|
|
... up to 8 digital measurement channels to meet the requirements of 9 parameters detection. The Detection objects are PH, ORP, conductivity, salinity...
2026-06-22 00:32:34
|