191 - 200 of 206
ip66 ph orp controller
Selling leads
|
...IP66 Introduction The DRFN's DUC2-CN1.1-H-D residual chlorine analyzer is a single-parameter instrument, it is connected to the residual chlorine ...
2025-08-02 00:10:58
|
|
IP66 Total Chlorine Analyzer 2 SPST Single Parameter For Waterworks Disinfection The total chlorine is the sum of the combined residual chlorine and ...
2025-08-02 00:10:58
|
|
...chlorite. Each controller will be pre-installed with a set of embedded software to adapt to different disinfectant digital sensors. By receiving a ...
2025-03-20 14:31:42
|
|
RS485 Online Digital COD Analyzer UV Method For The Measurement Of COD In Water Brief Introduction Of The COD Analyzer The DUC2-COD-H is a digital ...
2025-08-02 00:10:58
|
|
...Controller Measuring PH ORP Chlorine For Pools Product Introduction For swimming pools, water parks and other occasions, the detection of residual ...
2024-12-09 20:08:54
|
|
...4 digital channels:PH,dissolvedoxygen,conductivity and turbidity. It can measure up to 5parameters (temperature). MCC200 can be customized, the ...
2024-12-09 20:38:03
|
|
... up to 8 digital measurement channels to meet the requirements of 9 parameters detection. The Detection objects are PH, ORP, conductivity, salinity...
2025-08-02 00:10:58
|
|
... but not limited to PH, ORP, conductivity, salinity, TDS, dissolved oxygen, turbidity, MLSS, transparency, COD, TOC, residual chlorine, ammonia ...
2024-12-09 20:08:54
|
|
... method to test free fluoride ions in water. The measuring range of fluoride is 0.02~20mg/L. The ORP range is ±2000mV. The temperature range is -10...
2024-12-09 20:08:54
|
|
... current outputs. The operating temperature of the controller is 0~60℃. The protective grade of the turbidity controller is IP66, which can ...
2025-08-02 00:10:58
|