101 - 110 of 114
ip66 grade ph controller
Selling leads
|
...IP66 Introduction The DRFN's DUC2-CN1.1-H-D residual chlorine analyzer is a single-parameter instrument, it is connected to the residual chlorine ...
2026-05-24 00:14:25
|
|
IP66 Total Chlorine Analyzer 2 SPST Single Parameter For Waterworks Disinfection The total chlorine is the sum of the combined residual chlorine and ...
2026-05-24 00:14:25
|
|
...chlorite. Each controller will be pre-installed with a set of embedded software to adapt to different disinfectant digital sensors. By receiving a ...
2025-03-20 14:31:42
|
|
RS485 Online Digital COD Analyzer UV Method For The Measurement Of COD In Water Brief Introduction Of The COD Analyzer The DUC2-COD-H is a digital ...
2026-05-24 00:14:25
|
|
... changes in chlorine concentration or pH value can affect ORP . Therefore, in order to measure chlorine accurately, chloride ion and pH value must ...
2024-12-09 20:51:50
|
|
... current outputs. The operating temperature of the controller is 0~60℃. The protective grade of the turbidity controller is IP66, which can ...
2026-05-24 00:14:25
|
|
...Controller Measuring PH ORP Chlorine For Pools Product Introduction For swimming pools, water parks and other occasions, the detection of residual ...
2024-12-09 20:08:54
|
|
RS485 Interface ORP Electrode For Wastewater Treatment Detecting ORP digital electrode, without instrument, can be directly connected to computer, PLC ...
2024-12-09 21:06:42
|
|
... pH value. Peracetic acid is produced by a reaction between hydrogen peroxide and acetic acid. The DRFN’s peracetic acid analyzer ADS2-U3-P9.2 ...
2024-12-09 20:08:54
|
|
..., especially for high concentrations. You can calibrate the sensor via analytical determination by DPD-method at the controller. The pH range of ...
2024-12-09 20:08:54
|