291 - 300 of 316
drinking water bromine sensor
Selling leads
|
PPS Online Digital ORP Probe IP68 Protection Grade For Continuous Measurement ORP is the abbreviation of Oxidation-Reduction Potential, which ...
2024-12-09 20:08:54
|
|
... sensor, make sure that the object to be measured is in full contact with the sensor. Before and after use, pay attention to flushing the poles ...
2024-12-09 20:34:57
|
|
...SS sensor to measure the concentration of suspended solids in water, or a MLSS sensor to measure the concentration of activated sludge in sewage. ...
2024-12-09 20:34:57
|
|
...water. Using the principle of electrochemical sensing, the electrochemical reaction of oxygen on the surface of the electrode is used to measure ...
2026-04-20 00:19:01
|
|
...the water treatment process, chlorination disinfection is an important part of water quality control in water plants. The DRFN's ADS2-U3D-CS4 ...
2024-12-09 20:08:54
|
|
... of soil, silt, fine organic matter and other microorganisms and colloids in the water can cause turbidity in the water. After the light wave sent ...
2024-12-09 21:09:09
|
|
...water and are one of the indicators to measure the degree of water pollution. The intelligent suspended matter sensor is designed and manufactured ...
2026-04-20 00:19:01
|
|
..., it is connected to the residual chlorine sensor to realize the detection of the absence of chlorine. The maximum working time of the sensor in ...
2026-04-20 00:19:01
|
|
... oxygen demand. It is a single parameter controller. A set of embedded software is pre-installed to adapt to different DRFN COD digital sensors; ...
2026-04-20 00:19:01
|
|
... can not only measure the pH and ORP value of water quality, but also measure conductivity, dissolved oxygen, COD, chlorine, etc. When you want to ...
2024-12-09 20:08:54
|