201 - 210 of 212
14ph ph electrode sensor
Selling leads
|
... is amperometric 2-electrode system with surfactant-resistant membrane. The interference of the measurement is O3, Cl2 does not interfere. The size ...
2024-12-09 20:08:54
|
|
.... The water quality sonde is non-membrane-covered, amperometric potentiostatic 3-electrode system. Sensors without membranes are less susceptible ...
2024-12-09 20:08:54
|
|
...digital sensor. The sensor uses the ion electrode method to measure ammonia nitrogen in the water. Specification: Model DUC2-NH4-H-A Software ...
2025-08-01 00:11:05
|
|
... can replace the measuring electrode with different K-constant to realize the different measuring requirements. At the same time, the measuring ...
2024-12-09 20:08:54
|
|
...water. Using the principle of electrochemical sensing, the electrochemical reaction of oxygen on the surface of the electrode is used to measure ...
2025-08-01 00:11:05
|
|
... up to 8 digital measurement channels to meet the requirements of 9 parameters detection. The Detection objects are PH, ORP, conductivity, salinity...
2025-08-01 00:11:05
|
|
...Sensor With RS485 Modbus RTU The COD probe of Daruifuno adopts Spectral Absorption Coefficient (SAC) method, which can measure the absorption of ...
2025-08-01 00:11:05
|
|
...conductivity analyzer uses electrode measurement method to realize the continuously monitoring of the conductivity value in the solution. The AEC1...
2024-12-09 20:08:54
|
|
... Introduction The ADS2-U3A-CS4 free chlorine analyzer is connected to the free chlorine sensor with membrane-covered, amperometric 3-electrode ...
2025-08-01 00:11:05
|
|
... : colorimetric and ion selective electrodes (ISE). Colorimetric techniques use a reagent to produce a colour change proportional to concentration ...
2025-08-01 00:11:05
|