Shenzhen Yideyi Technology Limited Company

Shenzhen Yideyi Technology Limited Company

Shenzhen Yideyi Technology Co., Ltd is a PCB and PCBA manufacturer with more than 10 companies in China. 

Our company has a strong engineering team and a professional electronic component procurement team, serving many domestic and foreign automotive electronics, military electronics, power communications, industrial automation and intelligence It is a comprehensive manufacturing service provider integrating PCB manufacturing, electronic component procurement, SMT chip processing and testing assembly, and a high-quality supplier in the electronic processing industry.

Documents with a design order：

• Acquire all information needed, reviewing and verifying the accuracy.
• Schematic capture and net list generation (if not done yet).
• Create part library for the project.
• PCB component placement.
• Submit intermediate placement to engineer for reviewing. This is usually a discussion-
modification process until get approval on final placement.
• PCB routing. PCB designer and engineer must maintain adequate and frequent
communication during the routing process.
• Complete PCB layout, finalize all documents.
 

For PCB layout documents：

• Provide as accurate information of circuit design and system requirement as possible.
• Avoid/minimize change on schematic after PCB layout process begins.
• Reducing density and making practical requirement.
• Choose responsible and highly skilled PCB designers.
• Schematics and BOM if the schematic capture process involved in the design order.
• Assembly drawings.
• Assembly machine pick-place data file.
• Solder paste stencil files.
• Other optional files as client required.

Our own strong production capability and lots of advanced equipments to meet complex demands and high quality standard. We're capable of manufacturing various special technology for both of PCB and PCBA products.

At present, our company has 350+ employees, including 50+ R&D personnel and 25+ quality personnel， our factory occupies 8,900 square meters.

We offer cable & wire harness, as well as full cabinet assembly.
Everything we build goes through our inspection process.
We offer PCB design and assembly for board builds.
YDY has experience in working with mission ready and rugged circuit boards that exposed to multiple elements.

Import international advanced sophisticated equipment to provide customers with efficient manufacturing and reliable quality product：

Workshop：

The new SMT workshop is equipped with central air conditioning, air shower room, anti-static treatment, constant temperature and humidity warehouse, etc.;

Equipped with new imported Siemens most advanced TX21, X2 placement machine, automatic solder paste printer, ten temperature zone reflow oven, wave soldering, AOI /SPI/XRAY/intelligent tester and other professional equipment.

The SMT production capacity is 25 million solder joints/day, and is especially good at high-precision and high-complexity veneers.

Operation room：

Our professional SMT factory has advanced equipments, such as the world-class stencil printing, SMT chip pick & place, solder reflow, and in-line testing and steel mesh manufacturing. AOI test machine and X-ray testing machines for quality check. All the boards will go through the most stringent tests

DRC Check
The Design Rules Check (DRC) is a very important step in PCB quality control. When we receive a new order from a customer, we will use an automated tool to verify that the layout does not have any specific placement, routing or other addressable layout errors.

Electrical Testing
Prototype Orders: We offer Flying-Probe E-Test for small volume and prototype orders. Your circuit board (PCB) is checked through a device called a Flying-Probe E-Tester. The Flying probe testers we use have few restrictions on access, require no test fixtures, and can test boards with virtually unlimited number of nets. The Tester will check for short circuits, open circuits and make sure the nets of the PCB we made is the same as the nets in your design. After testing is complete, the fail rate of your boards will be less than 1%.

Production Orders: We use Testing fixtures to test production orders. A bed of nails tester is a traditional electronic test fixture which has numerous pins inserted into holes in an Epoxy phenolic glass cloth laminated sheet (G-10) which are aligned using tooling pins to make contact with test points on a printed circuit board.

The fixture contains an array of small, spring-loaded pogo pins; each pogo pin makes contact with one node in the circuitry of the DUT (device under test). By pressing the DUT down against the bed of nails, reliable contact can be quickly and simultaneously made with hundreds or even thousands of individual test points within the circuitry of the DUT.

The Tester will check for short circuits, open circuits, and make sure the nets of the PCB we made is the same as the nets in your design. After testing is complete, the fail rate of your boards will be less than 0.1%.

AOI(Automated optical inspection)

We use an AOI to check the inner layers of multi-layers PCB. AOI visually scans the surface of the PCB. The board is lit by several light sources and observed by a scanner or by a number of high definition cameras. This enables the monitoring of all areas of the board.

AOI for a bare PCB board inspection will detect these features:

* Line width violations

* Spacing violations

* Excess copper

* Missing pads. I.e. a feature that should be on the board is missing

* Shorts circuits

* Cut traces or pads

* Hole breakage.( Breakout ) I.e. a drilled hole (via) is outside of its landing pad

Our company pays attention to the construction of high-tech R&D team. At present, it has an experienced and skilled R&D team with more than 50 people. It has formed a R&D echelon composed of doctors, masters and senior industry experts, specializing in various types of electronics. Product design, PCB design/EMC design, instrumentation, automation control, smart home, agricultural facilities, medical equipment control, computer software, embedded software, man-machine interface, system analysis and optimization, etc.

Our professional SMT factory has advanced equipments, such as the world-class stencil printing, SMT chip pick & place, solder reflow, and in-line testing and steel mesh manufacturing. AOI test machine and X-ray testing machines for quality check. All the boards will go through the most stringent tests

The goal of YDY system work is to deliver zero-defect products on time. For this reason, we adopt a proactive and proactive prevention strategy in our work, which is standardized and implemented by the production management team.

All your orders will be receiving a free engineering file review service from our trained and professional technicians before you pay in the most timely manner. Whenever you have any problems, you can always reach online customer service person to respond to your emails or messages. Our service people will follow your orders from the time you submit your Gerber file to the minute you receive your PCB and assembled PCBs in a satisfactory mood.

We has bridle-wise manage team ,design team and QC team ,and can supply customer their desired sample in the earliest date , arrange your order correctly, strictly control the mass production quality and lead time , and let the business goes smoothly !

Sales Service
• 24 hours online service
• Provide details about the production files from customers， like BOM, Gerber，Circuit diagram and ect
• Assign engineers for analysis and quotation（or Customized solution designs）
• 360° vedio visits to our production and R&D base

After-Sales Service
• Lifetime service
• We will never exempt our responsibilities on product owned defects.
• Responding time: upon receiving user’s notification, we ensure 24-hour after-sales technical support.
• Spare parts: necessary spare parts are provided together with products to customers.
• Free technical support: integrative and normative technology training is available for free to customers by our technical personnel to ensure they are skilled in regular operations of hardware and software of products and they are able to estimate and solve small problems.
• Investigation: our after-sales team will phone the user every month to follow up the working condition of the products, and to discover and solve

Business Sales Department

Our technical department organization structure：

Organizational structure：

Box building department：

YDY Senior Executive Team work with you：