Rubber Coated Self Aligning Conveyor Roller
Self Aligning Belt Self Taper Cone Rubber Coated Conveyor Rollers
Self Aligning Cone rollers are divided into conical upper-aligning
rollers and tapered lower-aligning roller groups. The tapered
rollers are damaged and have a long service life. Light weight and
low rotational inertia. The structure is reasonable and sealed.
Superior performance.
The characteristics of the Self Aligning tapered roller: the
tapered tube body is formed by high-frequency welded pipes and
seamless steel pipes. The wall thickness of the tube body is
uniform and the outer circumference of the tube meets the design
requirements, without the need for finishing the outer surface and
other processes. The outer diameter jumps are all less than 0.5mm.
Conical self-aligning idler, self-aligning, high sensitivity, large
cone angle, no wear, energy saving and consumption reduction.
The working principle of the Self Aligning tapered roller: When the
tape is deflected to any side, the upper beam of the roller group
rotates under the action of the sliding friction between the tape
and the small end of the tapered roller, and the tape is sent
straight to make the tape normal Move in the center.
The tapered roller is widely used in various transportation
industries such as steel mills, power plants, docks, coal mines,
etc. It has, anti-impact, anti-aging, no noise, self-lubricating
and non-tearing conveyor belt, reducing resistance and suitable for
long-distance transportation. Energy consumption.
Main Features of Conveyor Steel Roller, Conveyor Roller
The bearing housing and steel tube are assembled and welded with a
concentric automatic, welding machine.
Cuting of the steel tube and bearing is performed with the use of a
digital aute device/machine/equipment.
Fabrication of the roller is effected by an auto device and 100%
tested for its concentricity.
Roller and supporting components/materials are manufactured to
ISO/BS/JIS/DIN//CEMA standard.
product design
| Model Number | DTII, TD75 |
| Certificate | ISO9001:2008 |
| Standard | GB,DIN,ISO,CEMA,JIS,ETC |
| Diameter | 89-159mm |
| Length | 200-530mm |
| Pipe Material | Carbon steel/Q235 |
| Shaft Material | Steel drawn shaft |
| Bearing Brand | SKF,NSK,,HRB,LYC,ZWZ,C&U |
| Bearing Type | Deep groove ball bearing |
| Bearing Model | 4G204,4G205,4G305,4G306,4G308 |
| Bearing House | 2.5/3mm Metal Stamping |
| Sealing | Labyrinth seal, nylon 6 material |
| Grease | Lithium grease lubricant |
| Painting | Electrostatic spraying painting |
| Color | Customized |
Product Details:
1. Standard: GB/AS/CEMA/JIS/DIN.
2. Lift time: 30000-50000hours
3. Output: 500000 pcs/ year.
4. Warranty: One year.
5. Roller Diameter: 60-219mm.
6. Roller Length: 150- 3500mm.
7. Roller Pipe: Q235 carbon steel, with good state-of roundness and
straightness,and the pipe will be machined before welding with the
bearing house to ensure well-balanced rotation.
8. Shaft: Q235 or #45, made of cold-drawn bright round steel.
9. Bearing: Ball bearing C3 , HRB,SKF,NSK
10. Seals: Labyrinth seals, have a good water proof and dustproof.
11. Welding: Mixed gas shielded arc welding end.
12. Color: According to your requirement.
13. Surface: Powder coated /galvanized.
