Yunyi Explosion-proof Digital Insertion Digital Sensor Tuning Fork
Density Meter Price
The tuning fork density meter is an online density measuring
instrument based on the vibration principle, which is widely used
in real-time monitoring of liquid density. Its core component is
two tuning forks (vibrating forks) arranged in parallel, and the
liquid density is calculated by measuring the change in their
resonant frequency.
Working Principle
Vibration principle: The tuning fork vibrates at its natural
frequency under electromagnetic drive. After being immersed in
liquid, the vibration frequency will change due to different liquid
densities (the higher the density, the lower the frequency).
Signal processing: The sensor detects the frequency change,
converts it into a density value through a built-in algorithm, and
outputs a standard signal (such as 4-20mA or digital signal).
Detailed Images Tuning Fork Density Meter
Specification Tuning Fork Density Meter
| Density range : | 0-3 g / CM3 (3 /2.5/ 2 /1.5/ 1) |
| Output: | 4-20 mA 4-wire ( 2-wire system can not be used) |
| Accuracy: | 0.001 g / cc, with a resolution of 0.0001 g / cc |
| Insertion depth : | (flange distance to the end of the fork, minimum 125 mm, up to 2
meters) |
| Wetted material: | stainless steel, Hastelloy C22, 400 manganese alloys, titanium,
etc. |
| Fork Coating: | standard, PTFE or electrolytic polishing |
| Power supply: | 20 - 28 VDC, 35 - 45mA |
| Operating temperature range: | -50 ℃ ~ + 200 ℃ |
| Maximum working pressure: | 20Mpa |
| Fluid viscosity range: | 0 - 20000 cP |
| Temperature coefficient: | 0.1 kg / m3 / ℃ (corrected) |
| Process connection: | 1.5 "NPT threaded connection; DIN 50 PN40 and PN100 flange
connection; |
| Protection: | IP65 |
| Display: | Up density value, the density value can be switched to kg / cubic
meter or g / cc by unit keys. Down display a temperature value
(measured medium temperature ) temperature is original PT1000 |
| Accessory: | temperature of 4-20mA output signal |
