Digital Oil Milk Density Meter Tuning Fork Densimeter

Description Digital Oil milk density meter tuning fork densimeter

Tuning fork density meter is a high-precision, high-applicability vibration principle density meter produced by introducing the most advanced frequency tracking technology from abroad. The product design uses plug-in installation and is widely used in pipelines, open tank containers and closed tank containers Medium density detection.
The tuning fork density meter sensor is composed of two piezoelectric crystals. One piezoelectric crystal generates vibration and the other piezoelectric crystal detects vibration. The tuning fork sensor has a built-in temperature sensor to compensate the temperature of the piezoelectric crystal.
The split line of split tuning fork density meter is up to 2 meters in length. In order to reduce the interference of the tuning fork sensor line, a single wire jacket is used to protect the sleeve. The sensor line must be protected from interference and damage at the scene. It is relatively weak, and it is not recommended to use it in the place with electromagnetic interference.

Detailed Images Digital Oil milk density meter tuning fork densimeter

Specification Digital Oil milk density meter tuning fork densimeter

Installation Digital Oil milk density meter tuning fork densimeter

General installation principles:
1.The space around the bottom of the tuning fork is not less than 30 mm.The space around the tuning fork is not less than 12 mm.
2.The tuning fork body is not affected by strong currents.
3.The medium flows through the middle of the fork
4. For a more visual and systematic explanation of the installation methods, several common installation methods are specially arranged. When installing, refer to the following installation methods:
Classic installation method 1: in-line installation (low flow rate)
Classic installation method 2: oblique insertion installation (high flow rate)
Classic installation method 3: fixed installation kit installation (custom installation kit)

Dimension Digital Oil milk density meter tuning fork densimeter

FAQ

A:We will contact you as soon as possible but within 12 hours

Q: Can I get some samples?

A: Yes, Sample order is available for quality check and market test. But you have to pay the express cost.

Q: How soon can you arrange your production?

A: Once getting your product confirmation and receiving the prepayment, the production will be started immediately.

Q: What's delivery time?

A: It usually takes about 3-5 working days for small order and 10-15 days for big order.

Q:How do you control your quality ?

A: Three inspection steps(of original, production, and finished goods) + good warranty service(1 year free to change a new one without any human damage factors).

Q: What certificates do you have ?

A:ISO9000, CE, Explosion-proof certification, RoHs ready. And before the delievry of goods, quality and safety inspection certification issued by third parts also can be offered.

Q:Could I visit your factory?

A:Very welcome! Fly to Xian Yang air port. It was a big pleasure for us.

Q: What's your warranty terms?

A: We offer 12 months warranty time.

Q:can you provide OEM & Customized service?

A:Yes, OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.