Dental High Speed Handpiece Quattro Spray With Anti Retraction Head
|
|
Dorit Cheapest And High Quality Dental High Speed Handpiece With Anti-Retraction Head
High speed handpiece Description Standard Head Dental High Speed Dental Handpiece With Four Spray With Anti-Retraction Head Push button type high speed handpiece, four water spray, anti-retraction system, 2 holes 4 holes, super torque
2/4 Hole High Speed Handpiece Technical Data
2/4 Hole High Speed Handpiece Product Description
1. German ceramic ball bearing; open style cartridge.
2. Four separate air and water spray, with anti-retraction head, effective cooling for bur and treating contact surface.
3. Medical type Stainless steel body, Light weight 55g( same as one egg).
4. Streamlined design, comfortable for hand feeling, easy to clean.
5. 1 year warranty.
6. Unique electric generator, just a little air can generate
sufficient power 7. Self-illumination without connecting circuit 8. Perfect stable and reliable performance 9. Push Button cartridge 10. 135°C Autoclavable 11. Four water spray, more ideal cleaning effect 12. High-grade material with a stylish design 13.The ball bearing is steel ball to lead a longer life span 14.Push button,chang the burs more easily 15.Real steel ball bearing ! Low noise
Product details
After each patient use , maintenance should be done as follows: 1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate 2. Use a metal needle to clean the spray holes and fumaroles Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle 3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes ) 4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom 5. The handpiece with quick connector combination ( first determine the water switch is turned off ) 6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie ) 7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain 8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization Instruction: After each treatment,Sterilizing handpiece in autoclave according to the following steps: 1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution. 2.Lubricate handpiece, each times drop two drops inside of air inlet pipe. 3.Place into autoclaving pouch and mark. 4.Autoclave the handpiece for 12 min. at 135ºC.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: Dental High Speed Handpiece quattro spray Dental Handpiece Anti Retraction Dental Handpiece | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Dental High Speed Handpiece Quattro Spray With Anti Retraction Head |
|
4 Holes Connection High Speed Handpiece Φ11.2mm With Anti Retraction Head |
|
Chromium Dentist 45 Degrees Surgical Handpiece High Speed |
|
E Generator Fast Handpiece LED High Speed Ceramic Bearing Handpiece |
|
Dental Clinic Fiber Optic Coupling Handpiece High Chromium Alloy |
|
6 Hole Dental High Speed Fiber Optic Handpieces Kavo Type |