China Fiber Optic Handpieces manufacturer
Henan Dorit Biotechnology Co., Ltd.
DORIT--do right
5
Home > Products > Dental Handpiece Turbines >

Push Button 4 Hole Dental Handpiece With Anti-Retraction Head

Push Button 4 Hole Dental Handpiece With Anti-Retraction Head

Brand Name DORIT
Model Number DR-180
Certification ISO, CE, FDA
Place of Origin China
Minimum Order Quantity 5piece
Price Negotiable
Payment Terms L/C, D/A, D/P, D/P, Western Union, MoneyGram,Paypal
Supply Ability 2000pcs/ week
Delivery Time 5-8 work days
Packaging Details Carton
Product name High quality 4 Hole Push Button Dental Handpiece With Anti-Retraction Head
Bearing German ceramic ball bearing
Connection hole M4
Usage Dental Clinic
Noise 65 dB
Type 4 holes High Speed Dental Handpiece with anti-retraction head
Detailed Product Description

 
 

High quality 4 Hole Push Button Dental Handpiece

With Anti-Retraction Head

 

4 Hole Air Turbine Handpiece Technical Data
 

Air pressure at the back end of HP206-231KPa(2.1-2.35kgf/cm2)
Air pressure at the gauge in dental unit277-316Kpa(2.8-3.2kgf/cm2)
Water pressure198Kpa(2kg)
Power22W(Standard)
Rotation speed350,000~420,000rpm(Standard)
Head height13.0mm(Standard)
Head diameterΦ11.2mm(standard)
Chuck typePush button
Clamping force22N~34N
Bur ApplicableΦ1.59mm-Φ1.60mm*
Noise≤65DB


4 Hole Air Turbine Handpiece Dr-180 Details

 
 


About us
 

Henan Dorit Biotechnology Co., Ltd is located in the National University Science Park of Hi-Tech Development Zone, Zhengzhou, Henan Province. Henan Dorit specialize in dental treatmen equipment area, main product contains high or low speed dental handpiece, ultrasonic scaler, three-way syringe and Dental LED Curing light.

Low speed dental handpiece are mainly used to wear dentures, polished and planted. Divided into straight and bending machine.

High Speed dental handpiece mainly used to do treatment and repair more (such as holes, cutting).

All our product with CE, TUV, FDA certification, some areas can provide sample service, if you need, pls contact us anytime.


 

After each patient use , maintenance should be done as follows:

1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate

2. Use a metal needle to clean the spray holes and fumaroles

Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle

3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )

4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom

5. The handpiece with quick connector combination ( first determine the water switch is turned off )

6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )

7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain

8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization


 

 

 

 
 

 

 
 
Product Tags: Push Button 4 Hole Dental Handpiece   Anti Retraction 4 Hole Dental Handpiece   Push Button handpiece 4 hole  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: Henan Dorit Biotechnology Co., Ltd.
Subject:
Message:
Characters Remaining: (80/3000)