71 - 80 of 107
heat treated flying shear blade
Selling leads
|
...blade are mainly applied to guillotine shears, flying shears and cut to length lines, used for both hot and cold rolling, with general SHEARING M/C ...
2026-07-02 00:21:55
|
|
...m 200 to 2000mm, and the surface is treated with polishing. The high-quality material and craftsmanship ensures its superior performance and ...
2026-03-12 13:45:57
|
|
... shear blade, to discharge the resulting waste metal strips while trimming the metal coils on the slitters, each scrap chopper blades could have ...
2025-06-26 11:26:17
|
|
... Finishing and pickling lines. Our knives are made from material which is high wear resistant and has good tensile strength, combined with the most ...
2026-07-02 00:21:55
|
|
...shear blade for rolling mill workshop Senda Hydraulic shear blade are mainly applied to guillotine shears, and cut to length lines for tining lines...
2026-07-02 00:21:55
|
|
...thick plates,it require a higher performance than the other products. All our plate cutting blade will go through below process in our own factory: ...
2026-07-02 00:21:55
|
|
stainless steel plate guillotine Shear Knives for shearing machine SENDA produces guillotine Shear Knives mainly for metal. Different grades available ...
2026-07-02 00:21:55
|
|
cold rolling mill Double Cut Shear Knife for cut the front and rear side of the coil Senda cold rolling mill Double Cut Shear Knife used to used to ...
2026-07-02 00:21:55
|
|
...shear blade for metal plate cutting SENMA hot rolling mill shearing blade work for hot strip mill lines. On these lines, plate material is heated ...
2026-07-02 00:21:55
|
|
...shear blade for metal plate cutting Senda rolling mill plate shear blade are mainly used to cut rolled thick plates, with matching bottom blade. ...
2026-07-02 00:21:55
|