Coolmay CX3G-48M PLC Programmable Logic Controller 24DI 24DO Servo
Motor Controller - PLC controller*1
- PLC programming cable*1
Features Highly integration. At most 24DI/24DO (transistor output,or relay
output or mixed output), 8AI/4AO (Optional) Comes with 2 PLC programming ports: Mini typeB usb port (speed of
reading and downloading is more faster) and RS 232 (8-hole mouse head female seat), normally have 2 RS 485
ports. Support multi-channels high-speed counting and high-speed pulse. Support special encryption ((Attention:Only supports 8-bit password
encryption) 32K steps of program capacity, 32K power-failed holding registers
which support interrupting, linear arc interpolation and PID
auto-tuning. The network module can be selected according to customer
requirements to realize remote control.
Specification Model | CX3G-48M | Dimension | 200*90*36mm | Cutout size | 192*99mm | Installation | Fixed hole installation and DIN-Rail (35mm ) | I/O level | Input: Passive NPN, public terminal isolated Transistor output: NPN Relay output: Normally open dry contact | Digital I/O | 24DI/24DO | DO type | Relay(MR) or transistor(MT) or mixed(MRT) (Relay output: max load 5A/ transistor output: max load 500mA) | High speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ
60KHz + 1 AB phase 10 KHz | High speed pulse | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz High-speed counting + high-speed pulse < 480KHz | Analog I/O (optional) | 12AI/8AO | AI type (optional) | Type E/E_/K/K_/S/S_/T/T_/J/J_ thermocouple / PT100/ PT1000/ NTC10K/
NTC50K/ NTC100K/ 0~10V/ 0~5V/ 0-20mA/ 4-20mA/ -5V~5V/ -10V~10V | AO type (optional) | 0~10V/ 0-~5V/ 0~20mA/ 4~20mA -5~5V/ -10~10V (2DA for 1 minus voltage) | Default | 1 Mini type B USB programming port, 1 RS232 programming port
(Interface terminal is mouse female port with 8 holes), 2 RS485 COM
ports | Optional | Default 2 RS485 COM ports can be customized as 1 RS485, 1 RS232 COM ports, or 1 RS485 COM port, 1 CAN (2.0A/B), or 1 RS232 COM port, 1 CAN (2.0A/B) CX3G-48M can add Ethernet port. | Software | Compatible with WORKS 2 |
Purchase Note - It is Suggested to use WORKS 2 For CX3G PLC, which it is better
compatible.
- ODM and OEM are support if order can be reach request
quantity.
- More details you can offer as DI/DO,AI/AO, high speed requirements,
com ports...... ,it will be more fast to decide final model.
- If you need special cable, please advise.
|