Agriculture Handheld GPS Survey Equipment High Accuracy

Agriculture Handheld GPS Survey Equipment High Accuracy

Product Parameters Of Handheld GPS Survey Equipment:

Product function introduction Of Handheld GPS Survey Equipment:

Measuring  Way Of Handheld GPS Survey Equipment:

First, press up and down button to choose a measuring mode;

1. Normal mode : at the starting point, press [Start/Stop] button to measure in the main surface; return to the starting point in a circle around the 

    ground, press the [Start/Stop] button to pause the measurement data. Press the "power" button to end measurement and save data.

2. Circle Machine Load :First, set Circle value number in Parameter setting. And put this equipment in the car from a position which is the nearest 

   to the edge. Press [Start/Stop] button to start measuring while working.Press [Start] to go on when it’s not finished. Press the "power" button to

   end measurement and save data.

3. Fixed Width Mode : First, set width number in Parameter setting. And press [Start/Stop] button to start measuring at the starting point. Walk to 

   the under line then press [Start/Stop] button to pause and check the data; press the "power" button to end measurement and save data.

4. Fixed pointed Mode : at the starting, press [Start/Stop] button to start measurement, then press [enter] button to make one corner point; then

    walk along the edge to the next corner, and press [enter] button at every corner to collect information of each corner. At last, press the  [   

     Start/Stop] button to view the measurement data; press the "power" button to end measurement and save data.

5. L/W mode : at the starting point , press the [Start/Stop] button to measure,and press the [enter] button to save information; Going from point to

    another point, press the [enter] button to save information; then going from this point to the finial point, press the [enter] button to save   

     information; at last, press the [Start/Stop] button to view the measurement data; press the "power" button to end measurement and save data.

6. Round-trip Machine Load : In this mode, you could measure the area while the farm machine’s working. First, set the value number in

    Parameter Round-trip setting. Then press [Start/Stop] button to start measuring while working. Press [Start/Stop] button to check when   

    working  is done. Press [Start] to go on when it’s not finished. Press the "power" button to end measurement and save data.

7. Normal distance Mode : In this mode you can do distance measurement, at the starting point, press the [Start/Stop] button to start measuring. 

    And walk along the measuring line to the final point. Press the [Start/Stop] button when you reach the final, press the "power" button to end 

    measurement and save data.

8. MultiPoint Mode : In this mode you can do distance measurement that fits all kinds of flat terrain. At the beginning, press [enter] button to save 

    starting point, walk to the next point and press [enter] to save this point; press the "power" button to end measurement and save data.