Olycom Solar PoE Switch 4 Port DIN Rail Gigabit Unmanaged DC24V Input

4-Port Solar or Battery Powered PoE Switch

Bullets points

1. Dual Input: DC24V and IEEE802.3af/at PoE output with built-in voltage booster(if you do not need Fiber ports, please check our another PoE switch IM-WP054BGE)
2. Full Gigabit Speed: 2*100/1000M auto-adaptive SFP fiber ports and 4*10/100/1000Base-T Ethernet PoE ports
3. Industrial Design: Compact IP40 rugged metal case, -40°C to 75°C, Support DIN-Rail & Wall Mount
4. Application: Solar power system, RV/Vehicle/Truck/Bus and VoIP/Access control systems

Key Features

1. 6KV Ethernet surge protection, adapt to a harsh outdoor environment
2. Detect the PoE models of electrical equipment
3. Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
4. Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable

Technical Data

Dimension

Accessory

Product Query

1, Can I connect it with a non-PoE device?

Yes, it is 4*auto-sensing PoE ports detecting if the connected devices support PoE or not.

There will ONLY be network transmission if it is not 802.3af or 802.3at compliant.

2, What is the uplink speed?

100M/1000Mbps speed, for the SFP uplink, it also supports auto-sensing.

That is to say, it works when you plug in a 155Mb/s OR 1.25Gb/s fiber transceiver.

3, Which pin carries PoE?

Pins 1/2, 3/6 is for data pairs while Pins 4/5, 7/8 carries PoE output.

4, Can I use a battery to start your device?

Yes, as long as the voltage stands in DC12V~DC48V and the power Pins are properly connected.

Application

1, Low-voltage PoE system

2, In-vehicle Network

3, CCTV Monitoring

General Query

Is it managed?

A: Web Managed Version is available, model name: IM-FP244BGM

What installation method does it support?

A: It supports Din Rail and wall mounting.

If a special mounting kit is required, it is OK, we dealt with it before.

Does the fiber port support 100M speed?

A: Yes, for 100M models, it just supports 100M modules.

For Gigabit models, the fiber port is 100M/1000M auto-adaptive, you can insert 155Mb/s or 1.25Gb/s modules, both will work.

Can I have my logo on the device?

A: Yes, we are an OEM manufacturer.

Please just send your logo in PS/AI format, we will take care of the rest.