6 Axis Robotic Automatic Painting Machine 2.5KW 10in Touch Screen

6 Axis Robotic Automatic Painting Machine 2.5KW 10in Touch Screen

High quality and New Condition factory sell 6-axis Robotic Automatic Painting Machine with Robot Painting

The five axis reciprocating spraying machine with air spraying system will help you get a good coating film and reduce the manual cost. The details of automatic five axis spraying machine are as follows.

1. This machine is widely used in many industry. Generally speaking , standard type of this machine has two product tray. If you want to buy a machine with four product tray, then you will get double yield under the premise of high quality coating.

2. It is easy to debug the machine. You can finish debugging for usual product in 15 minutes. The program writing of machine is regard one plane of product as a program segment. When you finish setting the start point , end point and the spraying speed, then you have finished a program segment. After finish every program of plane, then the complete program is finished.

3.This machine has continuous spraying method and step spraying method.

4.The atomization and sector, painting output of spray gun can be controlled by computer. When the machine begin to spray , the spray gun can blow, in order to blow dust.

5.It is easy to use this machine ,and you can store 160 programs of product. The machine operated by fully digital computer.

The detailed configuration of the robot has written in the form, you can see our automatic spraying painting machine's configuration is high ,so the failure rate of machine is very low. If i were you ,i would buy a high quality machine if i want to buy a machine from abroad. Then, why don't you choose us?

Why use Spray Painting Machine?

1. Increase production efficiency

2. Cut down the operating cost

3. Improve product quality and consistency

4. Reduce material waste and boast productivity

5. Cut the standard cost-optimize the storage and complicated process

6. Shortens the product upgrading cycle and the equipment investment

7. Improve the working condition of workers

8. Low down the technical requirements for workers

Product details

Application:

The five axis automatic spraying reciprocating machine is wildly used in the field of plastic, electronics,hardware handicraft, TV shell,computer panels,glass,toys, woodwork,magnet ring etc, also suit for large flat parts(such as door,glass) etc precision surface spraying. The spraying process can reach the surface spraying or multi-surface spraying. Multi-axis linkage spraying or one axis reciprocating movement is OK. The parameter is adjustable flexible.the programming is convenient and fast.

Our customers' factory

After-sales:

1. We will send the engineers for onsite installation, commissioning and operation training.

2. We will provide fault handing service and lifetime warranty.

3. We provide 1 year warranty for each machine.

4. We will contact you back periodically to learn machine conditions.

5. We also provide the service for further extension on your existing machine.

FAQ

Question 1: I don't know anything about the machine. Will you provide the technical support?
Answer: Sure. Every machine will be test before delivery. We will make sure there is no problem for the machine while it leave our factory.
When the equipment is small and standard ,such as five axis spraying equipment,mini spraying line, small tunnel furnance or ovens,spraying power booth,curing furnace etc, We can send the detailed user manual and video to

help you install and operate the equipment. Of course,You can arrange 2-3 smart workers to come to our factory to learn how to operate the machine.

If the machine is spraying line and big,When the machine arrives your factory, we will send the experts to your factory to help for installation and commissioning. Operation training will be provide. Maintenance tips will be given and enough spare parts be provided.
Also, we provide consulting service for creating the proper facilities for running the machine.
 

Question 2: What is price of the machine?
Answer: Normally, Most of the machine is customized for our customer. If you have any drawing or any information on specification of the machine, please send to us for quote.
If you are totally new in this area, please send us the detail infos about your workpiece as blow:

1. The maximum size of workpiece:

2. The max weight of workpiece:

3. The output per month/per day:

4. Heating Temperature and Time(If you need the drying equipment):

5. Color changing(How many colors? How long will it take to change other colors ?)

6. Spraying process(What paint will you use? Spraying times? )

7. The workshop size for the equipment:

8. Some work-piece pics are needed:

9. The power: industrial three phase voltage

10. Other requirements from customer:

We will provide our professional suggestions and work out an appropriate design for your project.

Then the quotation with detail specification will be offered to you ASAP.