12kg Handheld Dry Fluorescence Immunoassay Analyzer IMX6 CPU

Dry Fluorescence Immunoassay Analyzer(ZOS-F2100) Parameter

Parameter

Simple operation instructions

1. click "scan two-dimensional code", aim the two-dimensional code card at the two-dimensional code scanner (about 10cm) to read the project information, and the interface prompts "information entry is complete", and then click "end entry".

Matters needing attention:
(1) for different items, the two-dimensional code card cannot be cross-scanned.
(2) Two-dimensional code cards with the same item and different batches cannot be cross-scanned.

2.Enter the information of the examinee, select the sample type, and click "OK".

Out-of-machine mode: means that the reagent card of the tested sample is incubated outside after adding the sample, and the reagent card is put into the instrument for sample result analysis after the incubation is completed.

3.Sample addition: suck the sample, add it into the buffer solution, and mix well.
Use the sample adding gun to add the absorbed and mixed sample to the reagent card according to the reagent instructions.

4. Test: put the reagent card into the reagent bayonet of the instrument, and the instrument will automatically identify the test items and carry out countdown test.

Matters needing attention:
(1) ensure that the reagent card is put in place.
(2) Do not add samples or test when the door is closed.
(3) When the countdown of a channel in the instrument interface is less than 20 seconds, do not add samples or test.
(4) Do not attempt to obstruct the door from closing.
(5) Clean up the reagent cards in the waste box in time, so as not to hinder the normal loss of cards.

Product features:

Company profile