Android System Dry Fluorescence Immunoassay Analyzer Automatic printing

Dry Fluorescence Immunoassay Analyzer(ZOS-F2100) Simple Operation Instructions

parameter

Simple operation instructions

1. Click "Scan the QR code", point the QR code card at the QR code scanner (about 10cm), read the project information, the interface prompts "Information Entry Complete", and click "End Entry".

Notes:
(1) Different items, the two-dimensional code card can not be cross-scanned.
(2) The same items, different batches, the QR code card can not be cross-scanned.

2.Enter the tested information, select the sample type, and click OK.

Off-machine mode: refers to the measured sample reagent card that is incubated externally after adding the sample, and puts the reagent card into the instrument for the sample result analysis.

3.Add sample: absorb samples, add buffer and mix well.
Use the sample sample gun to add the absorbed sample to the reagent card according to the reagent instructions.

4. Test: put the reagent card into the instrument reagent bayonet, the instrument automatically identifies the test items, and conducts the countdown test.

Matters needing attention:
(1) Please ensure that the reagent card is in place.
(2) When the cab door is closed, do not add samples or tests.
(3) Do not add samples or test when the channel countdown on the instrument interface is less than 20 seconds.
(4) Don't try to prevent the door from closing.
(5) Clean the reagent card in the waste bin in time to prevent the instrument from losing the reagent card normally.

Product features:

Company profile