Automatic Inflator For Inflatable Life Jacket

1, no matter when it is enabled, the use of the trigger can not exceed the storage period, overdue timely replacement.

2, trigger in extreme (high temperature and humidity) environment, must shorten the service life, increase the frequency of replacement.

3, the automatic valve (trigger) should be stored in a clean, dry, ventilated and temperature 0℃ ~ 30℃, relative humidity 40% ~ 60% environment.

4, when the trigger is removed from the storage environment or installed on the automatic valve to calculate the service life.

5. After the inflating equipment is used, do not store it in high temperature, high humidity and no air circulation environment (such as car trunk, closed locker, etc.) to avoid trigger error.

6, after triggering into the water, please replace the new trigger in time. The trigger is disposable and cannot be reused. It can only be replaced.

7, the trigger tail has a status indicator, indicating that the green represents the effective state. Red indicates failure and requires immediate replacement.

8. This product implements civilian standards and cannot be used for military purposes. If you need military standard products, please contact us.

9, if the matching automatic valve or gas cylinder does not meet the requirements of ISO 12402-7:2007 standard, resulting in no puncture or small puncture opening, and other performance failures, we do not assume any responsibility for this.