Single Use Intraocular Lens Placement System Features - Microincision intraocular lens implantation is realized through
this injector system, which incision size is 2.2mm.
- The cartridge is made of medical grade polypropylene which has high
molecular weight uniformity and good biologival safety.
- The Injection System for Intraocular Lens structure design conforms
to the requirments of ergonomics with good control and stable
injectortion.
- The Injector has thicken head to prevent the cartridge from falling
out during Injector.
- The cartridge is closed tightly during injection process because of
locking mechanism design,whcih will benefit to smooth implantation.
- The cartridge tunnel is transparent, which is convenient observe
the intraocular lenses loading and avoid the failure of injection.
- The primary package of products is designed to ensure stable
transportation and avoid packaging debris falling off.
Single Use Intraocular Lens Placement System Instruction for Use - Open the package using standard sterile procedure.
- Apply moderate amount of viscoelastic gel into the cartridge
tunnel.
- Along the cartridge direction load the intraocular lens into the
center place of the opened cartridge with the lens in reverse "S"
shape, then close the folding wings with a "click" locking sound.
- Place the cartridge in the groove of the injector, press it down to
the bottom, and then push forward to the end.
- Use the injector to implant the intraocular lens.
|
