201 - 210 of 330
hdpe pipe electrofusion welding machine
Selling leads
|
... at both ends of the pipe should not exceed 10% of the wall thickness, which can be improved by adjusting the straightness and the elastic slip of ...
2025-05-16 14:17:25
|
|
...welding machine SHT800-SHY manufactures When the time is up, withdraw the movable frame, quickly take out the heating plate, and then close the two ...
2025-05-16 14:17:25
|
|
... before use.Clean the oil or foreign matters at both ends of the pipe with a clean cloth. Butt Fushion Welding Machine Technical data: SHT1000 -SHY ...
2025-05-16 14:17:25
|
|
... there are bumps, bumps and scratches on the surface.Put in the milling cutter, first turn on the power switch of the milling cutter, then close ...
2025-05-16 14:17:25
|
|
Quick Response HT32-9 pipe plastic fitting for Machinery Repair Description Removable PTFE coated heater with separate temperature control system, the ...
2025-05-16 14:17:25
|
|
...cutter, then close both ends of the pipe and apply appropriate pressure until there are continuous chips at both ends, remove the pressure,which ...
2025-05-16 14:17:25
|
|
Wholesaler HT63-7A Butt Fusion Welding Machine2.48"-for Building Material Description The raw material of the machine frame is aluminum, it is light ...
2025-05-16 14:17:25
|
|
...welding machine butt fusion joining video SHT250-SHY for Machinery Repair Shops Clean the dust and residue on the surface of the heating plate (pay ...
2025-05-16 14:17:25
|
|
...Electrofusion Welders IP54 Protection welding range 20mm to 315mm Description Generally, we use an electrofusion welding machine to heat the ...
2025-05-16 14:17:25
|
|
...Electrofusion Welding Machine AC220V 2.5KW Elecrto Fushion Welders Description Generally, we use an electrofusion welding machine to heat the ...
2025-05-16 14:17:25
|