141 - 150 of 150
65mn blade pe pipe cutter
Selling leads
|
... hydraulic butt fusion welding machines is able to weld pipes and fittings with material pe pipe,hdpe pipe , operation easily and suitable for any ...
2025-05-16 14:17:25
|
|
...cutter, then close both ends of the pipe and apply appropriate pressure until there are continuous chips at both ends, remove the pressure,which ...
2025-05-16 14:17:25
|
|
... the burn.Before cutting the pipe (piece), make sure that the end face of the pipe (piece) is clean and free of dirt to prevent damage to the ...
2025-05-16 14:17:25
|
|
...pipe butt welder SHT200-2/4(A) for Construction works The main body supports and center the plastic pipes with two fixed and two movable clamps. ...
2025-05-24 21:36:04
|
|
Introduction The machine should be operated on a dry area. The protective measures should be adopted when it's used in rain or on wet ground. The ...
2026-04-01 00:26:49
|
|
...Manufacturing Plant HT307A Plastic pipe cutter description: Self-locking ratchet design, it will not bounce when cutting, safer.The safety lock at ...
2025-05-24 21:35:29
|
|
... strength and performance. ›See more product details.Before cutting the pipe (piece), make sure that the end face of the pipe (piece) is clean and ...
2025-05-16 14:17:25
|
|
... welding machine is suitable for PE and PP pipes and fittings.The lift of the machine can take the milling cutter and heating plate to the ...
2025-05-16 14:17:25
|
|
... material without description otherwise the machine may be damaged or some accident may be resulted in.The lift of the machine can take the milling ...
2025-05-16 14:17:25
|
|
... to weld pipes made from PE, PP, PVDF and cannot be used to weld material without description otherwise the machine may be damaged or some accident ...
2025-05-16 14:17:25
|