Automatic PE Workshop Fitting Welding Machine 90 - 315mm

90-315mm high quality automatic PE welding machine/ workshop fitting welding machine

Features

1. Using Teflon coating material imported from Japan, after twice coating and three processes.
2. The solid core of the Heating plate is thickened and non-stick tube, the heat transfer is even, supporting the aviation
connection line to ensure the contact safety of the power supply.
3. Compared with other manufacturers, the thickness of Heating plate is increased by 5mm, and the heat storage and thermal conductivity are strong.

1. Timer, pressure gauge, temperature controller and alarm shall be installed on the operating table to facilitate observation and improve welding efficiency.
2. The temperature controller and pressure regulating valve are CE certified, and the control precision can reach 0.01%.
3. The hydraulic station is installed with an accumulator, which can realize the function of automatic pressure replenishment and reduce the number of manual pressure replenishment.

1. High power milling cutter, mirror cutter disk, strong motor, high concentricity, smooth milling.
2. High-power Bosch drill is adopted for milling motor, which is strong and strong without slipping
3. The milling cutter is equipped with a limited position switch, which can be rotated only when placed in the frame to prevent accidental injury.

Technical Parameters

Special Reminding
1.The machine is used to weld pipes made from PE,PP,PVDF and can not be used to weld material without description otherwise the machine may be damaged or some accident may be resulted in.
2.Don't use the machine in a place with potential hazard of explosion
3.The machine should be operated by responsible ,qualified and trained personnel
4.The machine should be operated on a dry area.The protective measures should be adopted when it's used in rain or on wet ground.
5.The machine is operated by 380v±10%,50Hz,If extended wire should be used,it should have enough lead section according to its length.

Our advantage:

1) CE, SGS, ISO9001 certificate

2) Provide on line video technique teaching of fusion welding

3) 1 years warranty

4) Provide customized welding machine

Our service:

1) We offer 1 year warranty and free spare parts. (Except for wearing parts)

2) We offer voltage and frequency of motor customization service, such as 110v 60hz.

3) We can put your LOGO on machine plate or packing (need your authorization on brand)

4) Machine can be shipped to overseas or domestic place by sea or air in LCL or FCL.